Configure preparation, lapaʻau wela, environmental controls and downstream metal handling around the actual aluminum scrap.
Plan aluminum decoating around scrap category and the downstream metal route.
UBC bale, painted profiles, oily turnings and mixed aluminum scrap require different preparation, gas handling and acceptance criteria.
Unuhi i ke poʻo poʻomanaʻo makeke i ke ala hoʻonaʻauao papahana
Pono ka hui kalepa e hōʻoia i ka mea, palena kānāwai a me ka hana ma mua o ka hoʻopuka ʻana i kahi hoʻonohonoho a i ʻole ka manaʻo kālā.
UBC and packaging scrap
Evaluate bale opening, shredding, iron and non-ferrous separation, coating load and the intended remelting route.
Automotive and painted scrap
Confirm paint system, oils, attached materials and alloy-separation requirements before selecting thermal treatment.
Profiles and extrusion scrap
Powder coating, anodizing film and attached hardware change preparation and downstream quality control.
Oily chips and turnings
Address cutting fluid, mākū, fines, oxidation and safe feeding as a combined pretreatment problem.
ʻO nā hōʻike e hōʻiliʻili ma mua o ka mālama ʻana i kahi ʻāina ma ke ʻano he papahana hana
Hoʻemi kēia mau nīnau i nā nīnau maʻamau a kōkua i ke alakaʻi ʻana i kēlā me kēia alakaʻi i ke kūkākūkā ʻenekinia kūpono.
- 01What scrap categories and coatings are included?
- 02What contaminants must be separated?
- 03Will the customer sell decoated scrap or remelt on site?
- 04What emissions and residue tests are required?
- 05How will metal recovery be measured at acceptance?
See the connected equipment boundary.
Reference visuals support early layout discussion. Final equipment, arrangement and interfaces are confirmed from the project material and site.
E holomua i ka papahana inā loaʻa nā hōʻike i koi ʻia.
Hoʻololi kēlā me kēia ʻīpuka i ka ʻike o ka mea kūʻai aku i kahi ʻenehana i wehewehe ʻia a ʻoihana paha no ka hoʻoholo aʻe.
Palena manawa
E ʻike i ka meaʻai hoʻomalu, ka mea nona a me ka mana hoʻoholo.
HoʻopukaKe alakaʻi papahana kūponoPapa hoʻokō
E hōʻoia i nā ʻae kūloko, kūlana huahana a me ka palena kaiapuni.
HoʻopukaHoʻopaʻa inoa wehe a me nā mea hōʻikePākuʻi pāʻoihana
E hōʻoia i nā puka huahana, mea pono, ke kālā a me ka hiki ke hana.
HoʻopukaKe kumu pāʻoihana pili i ka papahanaHoʻopau ʻenehana
E hoʻololi i nā ʻike i hōʻoia ʻia i ka hoʻonohonoho a me ka loiloi noi.
HoʻopukaHe pōkole i kūkulu ʻia no ke kūʻai ʻenehanaNā nīnau e hoʻoholo ai ma mua o ka hoʻonohonoho ʻana.
Hōʻike nā pane i ka palena ʻenehana; ʻaʻole lākou e pani i ka hoʻāʻo ʻana i nā mea kikoʻī a i ʻole ka loiloi hoʻokō kūloko.
ʻO ka papa inoa o ka ʻāina koʻikoʻi ka manaʻo e hiki ke hana ʻia kahi papahana?
ʻAʻole. He pale noiʻi ia. Ka hoʻomalu meaʻai kūloko, nā ʻae, kūlana huahana, hiki i ka mea kūʻai aku, pono ka hōʻoia ʻana o ka lawelawe a me ka pilikia pāʻoihana.
ʻO ka mea e pono e hoʻopaʻa ʻia ma mua o ka hoʻopaʻa ʻana i nā mea hana?
E hōʻoia i ka mea, mea nona, leo loaʻa, kahua hana, ʻae ala, hale kūʻai huahana, mea pono, pae hoʻoholo a me ka mana kālā.
No ke aha e hoʻokaʻawale ai i nā mākeke waiwai like ʻole?
Kaila, ilikai, lepo ʻaila, ʻōpala alumini, ʻOkoʻa nā mea kūʻai aku i nā hana biochar metallurgical a me nā papahana precursor hard-carbon, nā mana a me nā ʻano ʻae.
Pehea e hoʻohana ʻia ai ka noiʻi mākeke e nā kūʻai?
E hoʻohana iā ia e hana mua i nā nīnau ʻike a me ka hōʻiliʻili hōʻike, ʻaʻole ma ke ʻano he pani no ka ʻenekinia kikoʻī o ka papahana a i ʻole ka loiloi kānāwai kūloko.
E wehewehe i ka mea ma mua o ke koho ʻana i ka mea hana.
Kaʻana like ʻana i kahi wehewehe kikoʻī, leo loaʻa, kūlana kahua a me nā mea i hoʻopuka ʻia. E hoʻohana ʻo YUSHUNXIN i kēlā mau ʻoiaʻiʻo e hoʻomākaukau i ka palena kaʻina kūpono a me ke kūkākūkā hoʻonohonoho.
