Configure preparation, ọgwụgwọ thermal, environmental controls and downstream metal handling around the actual aluminum scrap.

IHE MERE ahịa / ALUMINUM DECOATING

Plan aluminum decoating around scrap category and the downstream metal route.

UBC agba, painted profiles, oily turnings and mixed aluminum scrap require different preparation, gas handling and acceptance criteria.

01 / NKWUKWU Ohere

Tụgharịa asụsụ isi okwu ahịa ka ọ bụrụ ụzọ ntozu oru ngo

Ndị otu azụmahịa kwesịrị ịchọpụta ihe ahụ, oke iwu na arụ ọrụ tupu ịnye nhazi ma ọ bụ atụmatụ mmefu ego.

UBC and packaging scrap

Evaluate bale opening, shreshing, iron and non-ferrous separation, coating load and the intended remelting route.

Automotive and painted scrap

Confirm paint system, oils, attached materials and alloy-separation requirements before selecting thermal treatment.

Profiles and extrusion scrap

Powder coating, anodizing film and attached hardware change preparation and downstream quality control.

Oily chips and turnings

Address cutting fluid, mmiri mmiri, fines, oxidation and safe feeding as a combined pretreatment problem.

02 / Ajụjụ ntozu

Ihe akaebe na-anakọta tupu a na-emeso obodo dịka ọrụ na-arụ ọrụ

Ajụjụ ndị a na-ebelata ajụjụ ọnụ ma nyere aka na ụzọ nke ọ bụla na-eduga na mkparịta ụka injinia ziri ezi.

  1. 01What scrap categories and coatings are included?
  2. 02What contaminants must be separated?
  3. 03Will the customer sell decoated scrap or remelt on site?
  4. 04What emissions and residue tests are required?
  5. 05How will metal recovery be measured at acceptance?
PROJECT VISUALS

See the connected equipment boundary.

Reference visuals support early layout discussion. Final equipment, arrangement and interfaces are confirmed from the project material and site.

Reference system boundary from preparation through controlled decoating and off-gas handling. Final arrangement follows the incoming scrap and downstream metal route.
Reference UBC project visual. Bale density, coatings, attachments, separation and remelting interfaces must be confirmed for each project.
Uzo Mkpebi nke Ogbo-GATED

Bulite ọrụ ahụ naanị mgbe ihe akaebe achọrọ dị.

Ọnụ ụzọ ámá ọ bụla na-atụgharị ozi ndị ahịa ka ọ bụrụ mmepụta teknụzụ akọwapụtara ma ọ bụ azụmahịa maka mkpebi ọzọ.

01

Ihuenyo ohere

Chọpụta nri nri a na-achịkwa, onye nwe na ikike mkpebi.

MpụtaNtuziaka oru ngo tozuru oke
02

Ihuenyo nnabata

Nyochaa ikike mpaghara, ọnọdụ ngwaahịa na oke gburugburu.

MpụtaIhe mepere emepe na ndekọ ihe akaebe
03

Ihuenyo azụmahịa

Kwenye ebe ngwaahịa, akụrụngwa, ego na ike ịrụ ọrụ.

MpụtaNdabere azụmaahịa akọwapụtara nke ọma
04

Inye aka nke injinia

Nyefee eziokwu enyochagoro n'ime nhazi na nyocha atụmatụ.

MpụtaNkenke ahaziri maka ire teknụzụ
FAQ oru ngo

Ajụjụ iji dozie tupu nhazi.

Azịza ya na-akọwa oke injinia; ha anaghị edochi ule ihe nnọchi anya ma ọ bụ nyocha nnabata mpaghara.

Ndepụta mba kacha mkpa ọ pụtara na a ga-ekwe omume ọrụ na-akpaghị aka?

Mba. Ọ bụ ihuenyo nyocha. Njikwa nri mpaghara, ikike, ngwaahịa ọnọdụ, ikike ndị ahịa, ọrụ na ihe ize ndụ azụmahịa ka chọrọ nkwenye.

Kedu ihe a ga-enyocha tupu ehota akụrụngwa?

Nyochaa ihe ahụ, onye nwe ya, olu dị, saịtị ọrụ, ikike ụzọ, ụlọ ahịa ngwaahịa, akụrụngwa, mkpebi mkpebi na ikike mmefu ego.

Gịnị mere na-ekewa dị iche iche ihe ahịa?

Taya, plastik, mmanu mmanu sludge, aluminom scrap, ígwè biochar na ike-carbon precursor ọrụ nwere dị iche iche zụrụ, njikwa na ụzọ nnabata.

Kedu ka a ga-esi jiri nyocha ahịa mee ihe site na ire ere?

Jiri ya dobe ajụjụ nchọpụta na nchịkọta ihe akaebe ụzọ, ọ bụghị dị ka onye nọchiri anya injinịa akọwapụtara nke ọma ma ọ bụ nyocha iwu mpaghara.

Nlele Nlebanya Nhazi

Kọwaa ihe tupu ịhọrọ akụrụngwa.

Kekọrịta nkọwa ihe nnọchite anya, olu dị, ọnọdụ saịtị na ihe ebumpụta ụwa. YUSHUNXIN ga-eji eziokwu ndị ahụ dozie oke usoro dị mkpa yana mkparịta ụka nhazi.

Malite Nyochaa oru ngo