YUSHUNXIN PV DISASSEMBLY SYSTEM

Configure Solar Panel Disassembly Around Module Construction and the Next Process

Frame and glass removal should be evaluated as the front end of a connected PV recycling route. Module construction, damage condition, throughput and downstream material requirements determine the equipment sequence.

סקור את בסיס הפרויקט

Reference solar panel frame removal equipment — Reference equipment context. Final configuration follows the approved project basis.

PROJECT DECISION BASIS

Compare the complete scope before comparing cost.

Published descriptions support early planning. קיבולת סופית, תְצוּרָה, performance and commercial terms require written confirmation against the submitted project facts.

Material basis

Module dimensions, construction, damage and incoming presentation

Connected system

Frame removal, glass separation, conveying and downstream handoff

Customer confirmation

Capacity basis, output condition, עֲבוֹדָה, utilities and layout

Complete solution route

Review the connected process page before fixing the equipment boundary.

Open the complete solution →

A complete disassembly line can include frame removal, glass removal, conveying and controls. Confirm the equipment boundary, drawings, utilities and commercial terms through project review.

קבל פתרונות מותאמים אישית

How can you further recycle photovoltaic modules after disassembly?

After solar panel disassembly equipment completes the disassembly and glass removal process, solar cells that cannot be directly utilized or low-value components require further processing through the following two main production lines.

Crushing and Screening Line
Pyrolysis Line

The core equipment of the crushing and screening line is Hammer Crusher, Air Classifier, מפריד זרם אדי, High-Voltage מפריד אלקטרוסטטי.
Through a series of crushing, grinding, and sorting technologies, it efficiently separate silicon from adhering metals such as silver grid wires and copper solder ribbons to produce high-purity silicon powder and particles with rich precious metals. High-purity silicon powder can serve as metallurgical-grade silicon feedstock or undergo further purification, with a much higher value than unseparated mixed scrap. Precious metal concentrates can be sent to specialized smelters for כֶּסֶף and copper extraction, which is one of the primary profit points in the recycling value chain.

The core equipment of the פתרון פרויקט פירוליזה של פאנל סולארי is Pyrolysis Tunnel Furnace, מפריד אוויר אנכי, Color Sorter.
In an oxygen-free environment, high temperatures decompose organic polymers (EVA, backsheets) into recoverable oils and gases, while simultaneously yielding clean glass, תאים סולאריים, ומתכות, thereby achieving complete separation of organic and inorganic materials.

We not only provide individual equipment but also offer comprehensive solutions and turnkey projects spanning from pretreatment to deep processing.

Proven Project Experience in Global Solar Panel Recycling

YUSHUNXIN not only provides solar panel recycling solutions but also brings extensive project experience across different markets. לְדוּגמָה, שֶׁלָנוּ 1000פרויקט מיחזור פאנלים פוטו-וולטאיים בק"ג לשעה בגרמניה and our מיחזור פאנלים סולאריים בהודו both use our core solar panel disassembly equipment to achieve efficient and stable material recovery.

Connected project pathways also cover lithium battery recycling, aluminum scrap decoating, plastic and tire pyrolysis, sludge treatment, and biomass carbonization. Final equipment selection depends on the documented feedstock, site conditions, שירותים, target outputs, and delivery boundary.

CATALOGUE-ALIGNED ENGINEERING BASIS

Pre-disassembly

Use as the front end of an approved route; compatible module envelope remains drawing-controlled.

Incoming material

Module length, width, thickness, frame section, junction-box location, breakage and stacking method.

Expected outputs

Removed frame, junction box/cable and a prepared laminate for the next process.

Project interfaces

Infeed/outfeed elevation, guarding, manual intervention, damaged-glass management and line communication.

MODEL AND SCOPE REGISTER

Use only the row matching the selected process boundary.

Catalogue reference	יְכוֹלֶת	כּוֹחַ	Physical envelope	Included boundary
YSX-M1000Single-glass mechanical	1 t/h	277.6 kW	36 × 6 × 6 m	Integrated mechanical line

Configuration rule: catalogue capacity is a planning reference. Stable throughput, installed/operating power, footprint, recovery, טוֹהַר, emissions and utility demand require the approved equipment list, representative material and written acceptance conditions.

Information required before configuration and quotation

Representative material photos, specifications and available sample.
Required capacity plus hours per shift, shifts per day and operating days.
תפוקות יעד, sampling method and downstream receiver requirements.
Site country, available power, fuel, מַיִם, compressed air and building limits.
Local environmental, fire, storage and occupational-safety requirements.
Requested delivery boundary: צִיוּד, מַעֲרָך, הַתקָנָה, commissioning and training.

Configure Solar Panel Disassembly Around Module Construction and the Next Process

Compare the complete scope before comparing cost.

Material basis

Connected system

Customer confirmation

Complete solution route

How can you further recycle photovoltaic modules after disassembly?

Crushing and Screening Line

Pyrolysis Line

Proven Project Experience in Global Solar Panel Recycling

Pre-disassembly

Incoming material

Expected outputs

Project interfaces

Use only the row matching the selected process boundary.

התחל עם איש הקשר שלך. בנה את נתיב הפרויקט הנכון.

יצירת קשר ומסלול פרויקט

בסיס חומר והפעלה

שלב ההחלטה ואבן הדרך הבאה

סקור את עובדות הפרויקט.

Configure Solar Panel Disassembly Around Module Construction and the Next Process

Material basis

Connected system

Customer confirmation

Complete solution route

How can you further recycle photovoltaic modules after disassembly?

Crushing and Screening Line

Pyrolysis Line

Proven Project Experience in Global Solar Panel Recycling

Incoming material

Expected outputs

Project interfaces

Use only the row matching the selected process boundary.

Information required before configuration and quotation

Continue from material stream to system design and project decision

התחל עם איש הקשר שלך. בנה את נתיב הפרויקט הנכון.

יצירת קשר ומסלול פרויקט

בסיס חומר והפעלה

שלב ההחלטה ואבן הדרך הבאה

סקור את עובדות הפרויקט.