Sa tagsibol ng 2023, nakatanggap kami ng pagtatanong mula sa isang eco-friendly na kumpanya ng enerhiya mula sa Ontario, Canada. Ang kliyenteng ito ay nasa negosyo ng municipal solid waste recycling sa loob ng maraming taon. Sa harap ng lalong mahigpit na mga patakaran sa pamamahala ng basurang plastik, agarang kailangan nila ng teknolohikal na tagumpay. Ang gobyerno ng Canada ay nagtakda ng pambansang layunin ng pagkamit “Zero Plastic Waste” ni 2030 sa 2020. Higit pa rito, nagpatupad ito ng mga pagbabawal sa mga single-use plastics at circular economy incentive mechanisms sa lahat ng probinsya. Samakatuwid, ang kliyenteng ito ay naghahanap ng plastic-to-oil pyrolysis facility sa Cananda.
Ano ang pinakamalaking alalahanin ng customer?
Tanong sa amin ng kliyente, “ Posible bang legal na ipatupad itong plastic pyrolysis technology sa Canada?” Lubos naming nauunawaan ang mga alalahanin ng kliyente. Mahigpit ang balangkas ng regulasyon sa kapaligiran ng Canada, partikular para sa mga proyektong may kinalaman sa pagtatapon ng basura at pagbawi ng enerhiya.
What Final Products Can a Plastic Pyrolysis Plant Produce?
Another important product is syngas, also called non-condensable combustible gas. This gas is usually not the main product for external sale. Instead, it can be purified and returned to the furnace as heating fuel for the pyrolysis reactor. This helps the plant reduce external fuel consumption and lower daily operating costs. For large-scale or continuous plastic pyrolysis projects, syngas reuse is an important part of the overall energy-saving design.
The third product is char residue. The quantity and quality of char residue depend on the plastic composition, ash content, additives, and contamination level. In some projects, it can be used as a low-grade solid fuel or sent to cement plants or brick factories for co-processing after testing. If the residue contains unsuitable impurities, it should be handled according to local environmental regulations. Samakatuwid, YUSHUNXIN usually recommends raw material sorting before feeding, especially removing metals, sand, stones, PVC, PET, and high-moisture contaminants.
Ang langis ba mula sa pyrolysis ay tunay na makabuo ng pang-ekonomiyang halaga?
"Maaari ba talagang kumita ang teknolohiyang ito ng plastic-to-oil sa merkado ng Canada?” Ito ay isang tanong na madalas itanong ng maraming mga customer. Although syngas and char residue also have reuse potential, pyrolysis oil is usually the main product that customers care about most. For a plastic pyrolysis project, the economic value of oil depends on three factors: local fuel demand, oil quality after condensation, and whether the customer has stable downstream buyers.
What Technical Details Make a Plastic Pyrolysis Facility More Reliable?
Reliable pyrolysis technology is key to napapanatiling mga solusyon sa plastic-to-fuel. These technical details directly affect oil yield, operating cost, equipment safety, and long-term project profitability.
1. Feedstock Sorting Before Pyrolysis
The quality of waste plastics directly affects oil yield, oil quality, equipment stability, and emission pressure. Before feeding, mga metal, stones, sand, salamin, PVC, PET, and excessive moisture should be removed as much as possible. PVC may increase acid gas treatment pressure, while PET and high-ash materials usually reduce oil yield. For mixed municipal plastic waste, YUSHUNXIN can recommend a sorting and pretreatment system before the pyrolysis reactor to improve continuous operation stability.
2. Oxygen-Limited Pyrolysis Reactor Design
Plastic pyrolysis must be carried out under an oxygen-limited or oxygen-free condition. If too much air enters the reactor, the plastic may burn instead of cracking into oil gas. Samakatuwid, the reactor should have good sealing performance, stable feeding control, pressure monitoring, and temperature control. In a larger project, automatic feeding and discharging systems can also reduce air leakage and improve production continuity.
3. Wax and Heavy Oil Fraction Management
When processing PE, PP, or mixed plastic waste, wax generation is a common technical issue. If wax condenses too early inside the oil gas pipeline, it may cause blockage, reduce condensation efficiency, and increase maintenance frequency. To solve this problem, YUSHUNXIN can equip the system with an oil-gas separator, heavy oil collection section, insulated pipelines, and a dewaxing tank. The separated wax can be collected, reheated, returned for secondary cracking.
4. Multi-Stage Cooling and Condensation System
The oil yield of 50%–80% is tested under a matched cooling and condensation system, so the condenser design is very important. A simple condenser may not fully collect the oil gas, especially when the gas contains both light fractions and heavy wax fractions. YUSHUNXIN can use multi-stage condensation to separate heavy oil, light oil, and non-condensable gas more effectively. This helps improve liquid oil recovery and makes the final oil collection process more stable.
5. Tail Gas Treatment and Emission Control
Plastic pyrolysis projects must consider odor, dust, acid gas, VOCs, and other possible emissions. According to the raw material type and local environmental requirements, the system can be equipped with spray tower, deacidification unit, activated carbon adsorption, dust removal, and other exhaust gas treatment devices. This part is especially important for overseas projects because environmental approval often focuses not only on the reactor, but also on the full emission control process.
Plastic pyrolysis plant cost: machine price vs complete green solution cost
When customers ask about plastic pyrolysis machine price, they usually want to know the machine price first. Gayunpaman, for a real plastics-to-oil project, the total budget includes two major parts: equipment cost and extra project cost.
| Solution type | Suitable capacity | Main equipment | Equipment cost reference | Extra project cost reference |
|---|---|---|---|---|
| Batch plastic pyrolysis plant | 5–10 t/d | Batch pyrolysis reactor, feeding system, condenser, oil tank, water seal, gas recovery system, basic emission treatment | USD 120,000–300,000 | USD 30,000–120,000 |
| Semi-continuous plastic pyrolysis plant | 15–25 t/d | Automatic feeder, pyrolysis reactor, automatic discharging system, dewaxing tank, multi-stage condenser, syngas reuse system, tail gas treatment, PLC control | USD 320,000–850,000 | USD 100,000–350,000 |
| Continuous plastic pyrolysis plant | 30–80+ t/d | Pretreatment system, continuous feeding system, continuous reactor, automatic slag discharge, oil-gas separator, dewaxing unit, multi-stage condensation, syngas purification, kontrol ng emisyon, storage system, automatic control system | USD 900,000–3,200,000+ | USD 300,000–1,500,000+ |
These ranges are only for early project evaluation. The final quotation depends on capacity, raw material type, automation level, emission standard, local installation conditions, and whether the customer needs pretreatment, distillation, storage, or civil engineering support.
Paano sa wakas ay nagsimula ang plastic-to-oil pyrolysis facility sa Canada?
