Ne obravnavajte imena reaktorja ali dnevne zmogljivosti kot celotne specifikacije projekta.
Surovina, priprava, kontinuiteta delovanja, kondenzacija, plinska varnost, ravnanje z izdelki, okoljske kontrole, pripomočke in lokalni obseg dostave je treba konfigurirati skupaj.
Odobrena referenca malega obsega
YSX-F1 do YSX-F5 označujejo 1, 2, 3, 4 in 5 t/dan zdrs ali modularno načrtovanje referenc za pnevmatike, preskusi s plastiko ali oljnim blatom.
Materialna bilanca
Olje, plin, trdne snovi in izhodi, ki vsebujejo kovine, zahtevajo reprezentativne surovine, stabilni podatki in dogovorjena meja vzorčenja.
Gospodarska meja
Cene, operativni stroški, vrednost izdelka in vračilo zahtevata datirane ponudbe in lokalne tržne dokaze.
Nadzor vira: odobren register izdelkov skupine YOTO. Končni parametri so izdani v tehničnem dogovoru za posamezen projekt.
YUSHUNXIN PLASTIC PYROLYSIS
Waste Plastic Pyrolysis Plant Configured From Feedstock Chemistry
Plan pre-treatment, thermal processing, dewaxing, kondenzacija, tail-gas handling and product storage as one project boundary. Tip plastike, tveganje za klor, moisture and feed consistency determine whether a proposed route is technically meaningful.
FEEDSTOCK FIRST
Plastic category alone is not enough for plant selection.
Polymer mix
PP, PE and PS may be suitable within a reviewed mix; PVC and other chlorine-bearing materials require special attention.
Physical condition
Film, rigid plastic, fluff, shredded material, vlage, dirt and metal contamination.
Supply stability
Daily availability, composition variation, storage and pre-treatment consistency.
Product objective
Define the intended oil fraction, gas use, residue handling and local sales or use boundary.
PROCESS BOUNDARY
Control the material before, during and after thermal treatment.
- 01
Sort and characterize
Confirm polymer mix, vlage, tveganje za klor, additives and incompatible materials.
- 02
Prepare the feed
Shredding, cleaning or drying is selected from the incoming condition and feeding method.
- 03
Feed and thermally process
Batch or continuous architecture is matched to supply stability, operating plan and site capability.
- 04
Manage wax and condensation
Wax-forming feedstocks may require a project-configured dewaxing stage before or within condensation.
- 05
Handle gas, oil and residue
Define non-condensable gas use, oil storage, residue cooling and tail-gas treatment.
PROCESS MEDIA & EQUIPMENT CONTEXT
Connect each equipment area to the operating basis.
These images show the furnace, overall layout, workshop context and output-handling area together with their process roles.
APPROVED CONFIGURATION BASIS
Use the reference envelope as a discussion starting point.
No universal oil yield, fixed price, emissions result or project profitability is stated. These depend on verified feedstock, local energy and product economics, operating conditions and regulatory requirements.
PROJECT GATES
Four reviews should be complete before procurement.
Feedstock gate
Composition, vlage, klor, ash, metal and supply consistency.
Process gate
Predobdelava, hranjenje, thermal architecture, dewaxing, condensation and residue handling.
Site gate
Utilities, shranjevanje, fire safety, emissions controls, labor and maintenance access.
Commercial gate
Scope inclusions, local obligations, product outlet, acceptance method and delivery boundary.
POGOSTA VPRAŠANJA O PROJEKTIH
Avoid comparing plants before the feedstock is comparable.
Can mixed plastic be processed?
Potentially, but the expected polymer and contamination range must be defined. Chlorine-bearing and incompatible materials can change process, corrosion and gas-treatment requirements.
How much oil will the plant produce?
No universal yield is published. Yield depends on representative feedstock composition, vlage, contaminants, operating conditions, condensation boundary and measurement method.
Should I choose batch or continuous operation?
The choice depends on feedstock preparation and stability, plant scale, labor model, maintenance plan, site capability and investment stage.
Does the equipment automatically satisfy local emissions rules?
št. Destination-country permits, emission limits, monitoring and site obligations must be confirmed as part of the project boundary.
START THE PLASTIC REVIEW
Share composition, contamination and operating plan.
The project desk will review missing facts before discussing configuration or price.
Waste-plastic pyrolysis starts with polymer identification and sorting
PE-, PP- and selected PS-rich streams can follow different thermal and condensation behavior. PVC, PET, brominated plastics, medical plastics and e-waste plastics require separate assessment.
Sledite gradivu, hlapi, tekočina, plinske in trdne poti
Reaktor je en del proge. Komercialna uporabnost je odvisna od tega, kako je vsak tok pripravljen, preneseno, nadzorovan in izpraznjen.
- 01Karakterizacija materiala
- 02Priprava krme in zaprt prenos
- 03Nadzorovana toplotna pretvorba
- 04Ločevanje hlapov in stopenjska kondenzacija
- 05Varnost in ponovna uporaba nekondenzirajočega plina
- 06Solidno hlajenje, praznjenje in ravnanje z izdelki
Konfiguracijska vprašanja, ki spremenijo predlog
Pred izbiro zmogljivosti ali pripravo komercialne ponudbe je treba razrešiti naslednje točke.
Polymer composition
Confirm PE, PP, PS, PVC and PET proportions instead of describing the feed simply as mixed plastic.
Halogen control
PVC and brominated additives can change corrosion, gas-cleaning and recovered-liquid requirements.
Wax management
Plastic-derived vapors and liquids may require temperature-controlled lines, insulation and condensation staging.
Product route
Define whether recovered liquid is intended for permitted fuel use, refinery feed evaluation or another locally accepted outlet.
Poskrbite, da bodo pripomočki in prodajna mesta izdelkov vidni pred naložbo
Koristen pregled izvedljivosti povezuje masno bilanco, energijsko bilanco, urnik delovanja in pot lokalnega proizvoda.
Urnik delovanja
Določite načrtovane ure na dan, izklopna okna, strategijo čiščenja, model dela in zmogljivost skladiščenja surovin.
Energetska integracija
Ocenite ponovno uporabo nekondenzirajočega plina, zagonsko gorivo, električne obremenitve, povpraševanje po hlajenju in neobvezna uporaba energije na nižji stopnji kot eno ravnotežje.
Kontrola kakovosti
Nastavite vzorčne točke za vhodni material, frakcije kondenzata, pridobljene trdne snovi, odpadne vode in izpušnih plinov.
Gospodarska meja
Proračunski rezultati ostajajo pogojni do surovin, mesto, Potrjena je pot izdelka in lokalne zahteve glede skladnosti.
Oglejte si mejo povezane opreme.
Referenčni vizualni elementi podpirajo zgodnjo razpravo o postavitvi. Končna oprema, ureditev in vmesniki so potrjeni iz projektnega gradiva in lokacije.
Prenesite projektna dejstva v seznam opreme.
Ta referenčna matrika prikazuje logiko odločanja. Končne količine, modeli in vmesniki sodijo v odobren projektni predlog.
| Sistemski blok | Tipičen obseg | Osnova konfiguracije |
|---|---|---|
| Polymer preparation | Sorting, shredding, drying and removal of incompatible fractions | PE, PP, PS, PVC, PET and additive profile |
| Feed and conversion | Density control, sealed transfer, reactor and heating system | Bulk density, melt behavior and operating duty |
| Wax and liquid handling | Temperature-controlled vapor lines, staged condensation and storage | Wax tendency and target recovered-liquid route |
| Halogen and gas control | Material exclusion, corrosion review and gas-treatment provisions | PVC, brominated additives and local limits |
| Residue and utilities | Trden izcedek, cooling, water and electrical interfaces | Residue classification and site conditions |
Napredujte s projektom le, ko so na voljo zahtevana dokazila.
Vsaka vrata spremenijo informacije o strankah v določen tehnični ali komercialni rezultat za naslednjo odločitev.
Polymer screen
Quantify target polymers, PVC, PET, additives, vlage in kontaminacije.
IzhodAccepted and excluded feed specificationThermal route
Validate feeding, obnašanje voska, condensation and corrosion controls.
IzhodMaterial-specific process routeProduct and permit
Confirm recovered-product status, outlets and local environmental boundary.
IzhodCommercial and compliance evidence packPregled konfiguracije
Freeze preparation, reaktor, okrevanje, utilities and acceptance interfaces.
IzhodProject configuration basisVprašanja, ki jih je treba rešiti pred konfiguracijo.
Odgovori določajo inženirsko mejo; ne nadomeščajo reprezentativnega testiranja materiala ali lokalnega pregleda skladnosti.
Kaj določa seznam opreme za neprekinjeno pirolizo?
Obrazec za surovine, sestava, vlage, kontaminacija, načrtovan urnik obratovanja, pot predelanega izdelka, pripomočki mesta in zahteve glede dovoljenj določajo konfiguracijo.
Lahko gume, plastika in oljna gošča uporabljajo popolnoma isto linijo?
št. Lahko imajo skupna načela toplotne pretvorbe, ampak njihova priprava, hranjenje, korozija, kondenzacija, trdno ravnanje in okoljski nadzor se bistveno razlikujejo.
Ali je mogoče učinkovitost pridobljenega olja zagotoviti s splošnim opisom materiala?
št. Pred količino zajete tekočine sta potrebni reprezentativna analiza in dogovorjena metoda vzorčenja, je mogoče oceniti kakovost ali nadaljnjo uporabo.
Kaj mora biti vključeno v sprejemno testiranje?
Določite surovine, trajanje teka, masno ravnotežje, stabilnost delovanja, vzorčeni rezultati, pripomočki, varnostne zapore in ustrezne preskuse emisij ali ostankov.
Pred izbiro opreme določite material.
Delite reprezentativen opis gradiva, razpoložljiva prostornina, status mesta in ciljne rezultate. YUSHUNXIN bo ta dejstva uporabil za pripravo ustrezne meje procesa in razprave o konfiguraciji.
