Konfigurirajte proizvodnjo ogljika, obdelava procesnih plinov, obremenitev kotla in obremenitev s paro odjemalca kot povezanega sistema.
Turn stable carbonization heat into useful industrial steam.
A steam project should be designed around the receiving process load. Carbonization gas, supplementary fuel, boiler duty, water treatment and backup capacity must work as one operating system.
Keep carbon quality and steam reliability under separate control
The carbonizer creates the primary product; the energy train converts suitable process gas and heat into a controlled utility.
- 01Biomass drying and feeding
- 02Kontinuirana karbonizacija
- 03Dust and condensable separation
- 04Gas cleaning and controlled combustion
- 05Steam generation and water treatment
- 06Distribution, metering and backup supply
Define the user before defining the boiler
Food and chemical plants require a clear hourly steam profile, pressure, quality and continuity basis.
Steam demand
Provide minimum, normal and peak demand, operating hours, pressure, temperature and seasonal production schedule.
Water system
Define raw-water quality, treatment, deaeration, blowdown, condensate return and make-up-water capacity.
Fuel stability
Gas cleaning, buffer volume, burner turndown and supplementary fuel determine pressure stability during feed or quality changes.
Interface boundary
Agree the battery limit for boiler house, steam header, merjenje, condensate return, civil works and operating responsibility.
Verify both carbon output and usable steam
Acceptance should be based on documented feedstock, operating conditions and measurement methods.
Carbon product
Record yield and product properties only against the tested biomass and agreed thermal program.
Steam output
Meter flow, pressure and temperature during a defined stable operating window instead of using theoretical heat alone.
Emissions boundary
Identify combustion, particulate and condensable controls and the local monitoring or permit requirements.
Continuity plan
Define startup, shutdown, vzdrževanje, low-gas operation and backup-steam behavior for the receiving plant.
Oglejte si mejo povezane opreme.
Referenčni vizualni elementi podpirajo zgodnjo razpravo o postavitvi. Končna oprema, ureditev in vmesniki so potrjeni iz projektnega gradiva in lokacije.
Prenesite projektna dejstva v seznam opreme.
Ta referenčna matrika prikazuje logiko odločanja. Končne količine, modeli in vmesniki sodijo v odobren projektni predlog.
| Sistemski blok | Tipičen obseg | Osnova konfiguracije |
|---|---|---|
| Gas preparation | Prah, condensable and moisture control with safe buffering | Carbonization-gas variability and burner limits |
| Combustion system | Controlled burner, combustion chamber and safety interlocks | Steam duty, turndown and supplementary-fuel plan |
| Boiler island | Boiler, economizer, blowdown, instruments and protection | Pressure, temperature and operating code basis |
| Water and condensate | Treatment, deaeration, make-up water and condensate return | Source-water quality and user return conditions |
| Steam delivery | Header, merjenje, pressure control and backup interface | Minimum, normal and peak customer demand |
Napredujte s projektom le, ko so na voljo zahtevana dokazila.
Vsaka vrata spremenijo informacije o strankah v določen tehnični ali komercialni rezultat za naslednjo odločitev.
Load profile
Capture minimum, normal and peak demand plus continuity requirements.
IzhodMetered or documented steam-demand basisEnergijska bilanca
Match process-gas availability, internal heat demand and backup fuel.
IzhodVerified preliminary heat balanceUtility design
Define boiler, vodo, condensate, header and emissions interfaces.
IzhodConnected utility configurationAcceptance plan
Agree test feedstock, stable window, meters and backup behavior.
IzhodMeasurable project acceptance sheetVprašanja, ki jih je treba rešiti pred konfiguracijo.
Odgovori določajo inženirsko mejo; ne nadomeščajo reprezentativnega testiranja materiala ali lokalnega pregleda skladnosti.
What information is needed from the steam user?
Provide minimum, normal and peak steam demand, pressure, temperature, operating schedule, condensate return, water quality and continuity requirement.
Can process gas alone guarantee continuous steam supply?
Not without verification. Buffering, burner turndown, supplementary fuel and backup capacity may be needed when feedstock or gas production varies.
What belongs in the steam-system boundary?
The scope may include gas treatment, zgorevanje, boiler, čiščenje vode, deaeration, blowdown, steam header, merjenje, condensate return and backup interfaces.
How should steam acceptance be measured?
Use metered flow, pressure and temperature during a defined stable operating window with the agreed biomass, carbonization conditions and auxiliary loads.
Pred izbiro opreme določite material.
Delite reprezentativen opis gradiva, razpoložljiva prostornina, status mesta in ciljne rezultate. YUSHUNXIN bo ta dejstva uporabil za pripravo ustrezne meje procesa in razprave o konfiguraciji.
Karbonizacija z dovodom odpadne toplote s paro
Konfigurirajte karbonizacijsko linijo in sprejemno obremenitev s paro iz ene izmerjene toplotne in masne bilance.
Vhodni material
Pripravljena biomasa plus urni/dnevni profil krmljenja in ciljna specifikacija ogljika.
Pričakovani rezultati
Biooglje in kvalificiran tok odpadne toplote za dogovorjeno porabo pare.
Projektni vmesniki
Sušenje krme, karbonizacijski plin, zgorevanje, kotel na odpadno toploto, čiščenje vode, parni tlak/obremenitev in nadzor delovanja.
Uporabite samo tisto vrstico, ki ustreza izbrani meji procesa.
| Referenca kataloga | Zmogljivost | Moč | Fizična ovojnica | Vključena meja |
|---|---|---|---|---|
| SXTD820Kontinuirana karbonizacija | 1–2 m³/h | 95 kW | 600 m² kataloška referenca zemljišča | Pripravljena linija za kontinuirano karbonizacijo biomase |
| SXTD1200Kontinuirana karbonizacija | 3–5 m³/h | 110 kW | 650 m² kataloška referenca zemljišča | Pripravljena linija za kontinuirano karbonizacijo biomase |
| SXTD1500Kontinuirana karbonizacija | 5–8 m³/h | 153 kW | 800 m² kataloška referenca zemljišča | Pripravljena linija za kontinuirano karbonizacijo biomase |
| SXTD1800Kontinuirana karbonizacija | 8–10 m³/h | 178 kW | 800 m² kataloška referenca zemljišča | Pripravljena linija za kontinuirano karbonizacijo biomase |
| SXTD2000 - 10–14 razredKontinuirana karbonizacija | 10–14 m³/h | 190 kW | 850 m² kataloška referenca zemljišča | Katalog natisne SXTD2000 za ta razred |
| SXTD2000 - 14–17 razredKontinuirana karbonizacija | 14–17 m³/h | 220 kW | 850 m² kataloška referenca zemljišča | Katalog ponavlja SXTD2000; koda končnega modela zahteva pisno potrditev |
Konfiguracijsko pravilo: kataloška zmogljivost je referenca za načrtovanje. Stabilen pretok, instalirana/obratovalna moč, odtis, okrevanje, čistost, emisije in komunalno povpraševanje zahtevajo odobren seznam opreme, reprezentativno gradivo in pisni sprejemni pogoji.
Potrebne informacije pred konfiguracijo in ponudbo
- Reprezentativne materialne fotografije, specifikacije in razpoložljiv vzorec.
- Zahtevana zmogljivost plus ure na izmeno, izmene na dan in delovne dni.
- Ciljni rezultati, metoda vzorčenja in zahteve za spodnji sprejemnik.
- Država spletnega mesta, razpoložljiva moč, goriva, vodo, stisnjen zrak in gradbene omejitve.
- Lokalno okolje, ogenj, zahteve glede shranjevanja in varnosti pri delu.
- Zahtevana meja dostave: opremo, postavitev, namestitev, zagon in usposabljanje.
