С2: Continuous Carbonization & Char-Gas Co-generation Solution

Our continuous carbonization system converts biomass and organic waste into high-quality biochar while simultaneously generating combustible syngas for power co-generation. The char-gas co-generation process achieves complete thermal energy circulation — the heat released during carbonization is captured and reused, dramatically improving overall energy efficiency.

Carbon accounting boundary: Potential storage and avoided-emission effects depend on feedstock traceability, biochar properties, end use, энергетический баланс, the selected methodology and independent verification. No carbon-credit eligibility or emissions result is stated before project-specific review.

Request ROI Analysis

ESG & Carbon Asset Management

Carbon-credit eligibility and any quantified climate benefit require a dated methodology, feedstock and operating evidence, product testing, eligible end use, independent validation and local project confirmation. They must not be treated as automatic project revenue.

Char-Gas Co-generation — Thermal Circulation Logic

The char-gas co-generation system operates on a closed-loop thermal circulation model:

1. Primary Carbonization: Biomass feedstock enters the continuous carbonization reactor, where controlled pyrolysis at 450-650°C produces biochar and releases volatile syngas.
2. Syngas Combustion: The hot syngas is directly fed into a gas combustion chamber, generating high-temperature flue gas (800-1000°C) for power generation via a steam turbine or ORC unit.
3. Waste Heat Recovery: Exhaust heat from power generation is captured through economizers and heat exchangers, preheating incoming feedstock and drying biomass — reducing moisture content below 15% before entering the reactor.
4. Thermal Recirculation: A portion of the hot flue gas is redirected to the carbonization reactor jacket, maintaining optimal pyrolysis temperature without external fuel input after startup.
5. Energy integration basis: Available gas and heat depend on feedstock moisture and composition, стабильность работы, gas cleaning, auxiliary loads and the selected generator or steam system. Self-sufficiency and export require a verified project energy balance and grid or receiving-load review.

Request Carbon Credit Assessment

YUSHUNXIN BIOMASS CARBONIZATION

Connect biochar production with usable heat, steam or power.

A continuous carbonization project can be evaluated as a carbon-product system and an energy system. The correct route depends on biomass consistency, target carbon specification, heat demand, operating scale and the customer's ability to use energy continuously.

01 / MATERIAL TO VALUE

Separate three commercial routes before selecting equipment

Metallurgical biochar, carbon-project biochar and hard-carbon precursor projects have different customers, testing methods and acceptance cycles.

Metallurgical biochar

Prioritize fixed carbon, пепел, sulfur, фосфор, strength, sizing and delivered cost for the downstream furnace.

Carbon-project biochar

Prioritize feedstock traceability, stable carbon, emissions data, operating records and the applicable carbon methodology.

Activated-carbon feedstock

Prioritize precursor uniformity, volatile matter, ash and the subsequent activation route.

Hard-carbon precursor

Treat the project as a development program: precursor purification, controlled pre-carbonization and sample validation come before an industrial-line promise.

02 / ENERGY ROUTES

Use the recovered energy where it creates the clearest operating value

Direct steam supply can be more practical when a stable industrial steam user is nearby; power generation becomes a separate engineering package with stricter gas-cleaning and load-matching requirements.

1. 01Dry and size the biomass
2. 02Continuous oxygen-limited carbonization
3. 03Separate dust and condensable fractions
4. 04Clean and condition process gas
5. 05Return heat to the carbonizer first
6. 06Evaluate steam, power or combined heat-and-power use

03 / FEASIBILITY GATE

What must be verified before an energy claim is used

Do not calculate an energy return from nameplate throughput alone.

Feedstock test

Влага, пепел, bulk density, particle size and seasonal variation determine drying and feeding requirements.

Carbon target

The carbon specification defines residence time, thermal profile, cooling and product handling.

Gas characterization

Gas quantity, heating value, tar, dust and moisture determine whether an engine, boiler or thermal oxidizer route is practical.

Demand match

Confirm the user's hourly steam or electrical load, pressure or voltage conditions, annual schedule and backup-energy requirement.

ВИЗУАЛИЗАЦИЯ ПРОЕКТА

См. границу подключенного оборудования.

Справочные визуальные элементы поддерживают обсуждение макета на ранних стадиях.. Окончательное оборудование, расположение и интерфейсы подтверждены из материалов проекта и сайта.

Посмотреть полную визуализацию проекта

ЭТАЛОННАЯ КОНФИГУРАЦИЯ

Преобразование фактов проекта в список оборудования.

Эта справочная матрица показывает логику принятия решений.. Окончательное количество, модели и интерфейсы входят в утвержденное проектное предложение.

Системный блок	Типичный объем	Основа конфигурации
Biomass preparation	Сушка, size control, storage and metered feeding	Влага, density and seasonal consistency
Карбонизация	Continuous reactor, atmosphere control and thermal profile	Target carbon specification
Product handling	Sealed cooling, sizing, storage and sample points	Oxidation, dust and product quality
Gas and condensables	Dust separation, condensation and gas conditioning	Tar, moisture and intended heat route
Энергетическая интеграция	Internal heat return, optional boiler, generator or user interface	Verified energy balance and demand match

ЭТАПНЫЙ ПУТЬ РЕШЕНИЯ

Продвигайте проект только тогда, когда доступны необходимые доказательства..

Каждый шлюз превращает информацию о клиенте в определенный технический или коммерческий результат для принятия следующего решения..

01

Biomass and product

Confirm biomass consistency and the actual carbon buyer specification.

ВыходQualified material-to-product basis

02

Термальный маршрут

Define drying, sizing, carbonization, cooling and quality sampling.

ВыходConnected carbon-production flow

03

Energy demand

Match process heat with a verified nearby steam, heat or power demand.

ВыходPreliminary energy-use boundary

04

Evidence and acceptance

Agree operating records, tests, emissions and any methodology review.

ВыходProject acceptance and evidence plan

Часто задаваемые вопросы по проекту

Вопросы, которые необходимо решить перед настройкой.

Ответы определяют инженерные границы; они не заменяют репрезентативные испытания материалов или проверку соответствия на местном уровне..

What changes the continuous carbonization configuration?

Biomass type, влага, particle size, пепел, target carbon specification, operating hours, heat-use route and environmental requirements change the equipment boundary.

Should steam or power generation be selected first?

The receiving energy load should be studied first. A stable nearby steam demand can favor direct steam use, while power generation requires a separate gas-cleaning, generator and electrical-integration package.

Can carbon-credit revenue be treated as guaranteed project income?

Нет. Eligibility depends on feedstock traceability, operating evidence, methodology, verification and local project conditions.

How is a hard-carbon precursor project different?

It requires precursor purification, controlled thermal development, powder processing and independent material or electrochemical validation beyond ordinary biochar production.

ОБЗОР ПРОЕКТА

Определите материал перед выбором оборудования.

Поделитесь репрезентативным описанием материала, доступный объем, статус объекта и целевые результаты. YUSHUNXIN будет использовать эти факты для подготовки обсуждения соответствующих границ процесса и конфигурации..

Начать обзор проекта