Do not treat a reactor name or daily capacity as a complete project specification.
Πρώτες ύλες, preparation, operating continuity, condensation, gas safety, product handling, περιβαλλοντικούς ελέγχους, utilities and local delivery scope must be configured together.
Approved small-scale reference
YSX-F1 to YSX-F5 denote 1, 2, 3, 4 και 5 t/day skid or modular planning references for tire, plastic or oily-sludge trials.
Material balance
Oil, αέριο, solids and metal-bearing outputs require representative feedstock, stable-run data and an agreed sampling boundary.
Commercial boundary
Prices, operating costs, product value and return require dated quotations and local market evidence.
Source control: approved YOTO group product register. Final parameters are issued on the project-specific technical agreement.
A continuous plastic-pyrolysis project adds controlled feeding, staged condensation, gas treatment and central controls. Uptime, energy demand, output routes and price require project confirmation.
How can sustainable plastic-to-fuel solutions deliver multiple benefits?
After formally entering the operational phase, the primary revenue streams for the plastic-to-fuel project include the following components.
Why Choose YUSHUNXIN?
We provide not only equipment but also turnkey solutions. These encompass raw material evaluation and process design, plant layout and equipment installation, operational training and maintenance guidance, as well as long-term technical optimization and after-sales service. Whether you are a plastic recycler, solid waste management company, or energy company in the circular economy, we can tailor the most cost-effective plastic-to-fuel project solution for you.
Εξάλλου, we can provide you with numerous other waste recycling systems, όπως eco-friendly ways to turn tires into fuel, εργοστάσιο πυρόλυσης αποβλήτων ιλύος, λύση έργου πυρόλυσης ηλιακών πάνελ, και κτλ. If you have any other requirements, feel free to contact us immediately!
PE-, PP- and selected PS-rich streams can follow different thermal and condensation behavior. PVC, ΚΑΤΟΙΚΙΔΙΟ ΖΩΟ, brominated plastics, medical plastics and e-waste plastics require separate assessment.
Follow the material, vapor, liquid, gas and solid paths
The reactor is one part of the line. Commercial operability depends on how each stream is prepared, transferred, controlled and discharged.
- 01Material characterization
- 02Feed preparation and sealed transfer
- 03Controlled thermal conversion
- 04Vapor separation and staged condensation
- 05Non-condensable gas safety and reuse
- 06Solid cooling, discharge and product handling
Configuration questions that change the proposal
The following points should be resolved before selecting a capacity or preparing a commercial quotation.
Polymer composition
Confirm PE, PP, ΥΓ, PVC and PET proportions instead of describing the feed simply as mixed plastic.
Halogen control
PVC and brominated additives can change corrosion, gas-cleaning and recovered-liquid requirements.
Wax management
Plastic-derived vapors and liquids may require temperature-controlled lines, insulation and condensation staging.
Product route
Define whether recovered liquid is intended for permitted fuel use, refinery feed evaluation or another locally accepted outlet.
Make utilities and product outlets visible before investment
A useful feasibility review connects the mass balance, energy balance, operating schedule and local product route.
Operating schedule
Define planned hours per day, shutdown windows, cleaning strategy, labor model and feedstock storage capacity.
Energy integration
Evaluate non-condensable gas reuse, startup fuel, electrical loads, cooling demand and optional downstream energy use as one balance.
Quality control
Set sampling points for incoming material, condensate fractions, recovered solids, wastewater and exhaust gas.
Commercial boundary
Budgetary results remain conditional until the feedstock, τοποθεσία, product route and local compliance requirements are confirmed.
See the connected equipment boundary.
Reference visuals support early layout discussion. Final equipment, arrangement and interfaces are confirmed from the project material and site.
Μεταφράστε τα γεγονότα του έργου σε μια λίστα εξοπλισμού.
Αυτός ο πίνακας αναφοράς δείχνει τη λογική απόφασης. Τελικές ποσότητες, μοντέλα και διεπαφές ανήκουν στην εγκεκριμένη πρόταση έργου.
| Μπλοκ συστήματος | Τυπικό πεδίο εφαρμογής | Βάση διαμόρφωσης |
|---|---|---|
| Polymer preparation | Ταξινόμηση, τεμαχισμός, drying and removal of incompatible fractions | Π.Ε, PP, ΥΓ, PVC, PET and additive profile |
| Feed and conversion | Density control, sealed transfer, reactor and heating system | Bulk density, melt behavior and operating duty |
| Wax and liquid handling | Temperature-controlled vapor lines, staged condensation and storage | Wax tendency and target recovered-liquid route |
| Halogen and gas control | Material exclusion, corrosion review and gas-treatment provisions | PVC, brominated additives and local limits |
| Residue and utilities | Solid discharge, cooling, water and electrical interfaces | Residue classification and site conditions |
Προώθηση του έργου μόνο όταν υπάρχουν διαθέσιμα τα απαιτούμενα στοιχεία.
Κάθε πύλη μετατρέπει τις πληροφορίες πελατών σε ένα καθορισμένο τεχνικό ή εμπορικό αποτέλεσμα για την επόμενη απόφαση.
Polymer screen
Quantify target polymers, PVC, ΚΑΤΟΙΚΙΔΙΟ ΖΩΟ, πρόσθετα, moisture and contamination.
ΠαραγωγήAccepted and excluded feed specificationThermal route
Validate feeding, wax behavior, condensation and corrosion controls.
ΠαραγωγήMaterial-specific process routeProduct and permit
Confirm recovered-product status, outlets and local environmental boundary.
ΠαραγωγήCommercial and compliance evidence packConfiguration review
Freeze preparation, reactor, ανάκτηση, utilities and acceptance interfaces.
ΠαραγωγήProject configuration basisΕρωτήσεις προς επίλυση πριν από τη διαμόρφωση.
Οι απαντήσεις ορίζουν το όριο της μηχανικής; δεν αντικαθιστούν αντιπροσωπευτικές δοκιμές υλικού ή τοπική αναθεώρηση συμμόρφωσης.
What determines the continuous pyrolysis equipment list?
Feedstock form, σύνθεση, υγρασία, contamination, planned operating schedule, recovered-product route, site utilities and permit requirements determine the configuration.
Can tires, plastics and oily sludge use exactly the same line?
Οχι. They may share thermal-conversion principles, but their preparation, feeding, corrosion, condensation, solid handling and environmental controls differ materially.
Can recovered oil performance be guaranteed from a general material description?
Οχι. Representative analysis and an agreed sampling method are required before recovered-liquid quantity, quality or downstream use can be evaluated.
What should be included in acceptance testing?
Define feedstock, run duration, mass balance, operating stability, sampled outputs, υπηρεσίες κοινής ωφέλειας, safety interlocks and the applicable emissions or residue tests.
Προσδιορίστε το υλικό πριν επιλέξετε τον εξοπλισμό.
Μοιραστείτε μια περιγραφή αντιπροσωπευτικού υλικού, διαθέσιμος όγκος, κατάσταση τοποθεσίας και εξόδους στόχου. Το YUSHUNXIN θα χρησιμοποιήσει αυτά τα στοιχεία για να προετοιμάσει τη σχετική συζήτηση για τα όρια και τη διαμόρφωση της διαδικασίας.
