Do not treat a reactor name or daily capacity as a complete project specification.
Feedstock, sauniuniga, operating continuity, condensation, gas safety, product handling, pulega o le siosiomaga, utilities and local delivery scope must be configured together.
Approved small-scale reference
YSX-F1 to YSX-F5 denote 1, 2, 3, 4 ma 5 t/day skid or modular planning references for tire, plastic or oily-sludge trials.
Material balance
Suauu, kesi, solids and metal-bearing outputs require representative feedstock, stable-run data and an agreed sampling boundary.
Commercial boundary
Prices, operating costs, product value and return require dated quotations and local market evidence.
Source control: approved YOTO group product register. Final parameters are issued on the project-specific technical agreement.
A continuous plastic-pyrolysis project adds controlled feeding, staged condensation, gas treatment and central controls. Uptime, energy demand, output routes and price require project confirmation.
How can sustainable plastic-to-fuel solutions deliver multiple benefits?
After formally entering the operational phase, the primary revenue streams for the plastic-to-fuel project include the following components.
Why Choose YUSHUNXIN?
We provide not only equipment but also turnkey solutions. These encompass raw material evaluation and process design, plant layout and equipment installation, operational training and maintenance guidance, as well as long-term technical optimization and after-sales service. Whether you are a plastic recycler, solid waste management company, or energy company in the circular economy, we can tailor the most cost-effective plastic-to-fuel project solution for you.
I le male, we can provide you with numerous other waste recycling systems, such as eco-friendly ways to turn tires into fuel, sludge waste pyrolysis plant, fofo o galuega faatino pyrolysis panel solar, and etc. If you have any other requirements, feel free to contact us immediately!
PE-, PP- and selected PS-rich streams can follow different thermal and condensation behavior. PVC, PET, brominated plastics, medical plastics and e-waste plastics require separate assessment.
Follow the material, vapor, liquid, gas and solid paths
The reactor is one part of the line. Commercial operability depends on how each stream is prepared, transferred, controlled and discharged.
- 01Material characterization
- 02Feed preparation and sealed transfer
- 03Controlled thermal conversion
- 04Vapor separation and staged condensation
- 05Non-condensable gas safety and reuse
- 06Solid cooling, discharge and product handling
Configuration questions that change the proposal
The following points should be resolved before selecting a capacity or preparing a commercial quotation.
Polymer composition
Confirm PE, PP, PS, PVC and PET proportions instead of describing the feed simply as mixed plastic.
Halogen control
PVC and brominated additives can change corrosion, gas-cleaning and recovered-liquid requirements.
Wax management
Plastic-derived vapors and liquids may require temperature-controlled lines, insulation and condensation staging.
Product route
Define whether recovered liquid is intended for permitted fuel use, refinery feed evaluation or another locally accepted outlet.
Make utilities and product outlets visible before investment
A useful feasibility review connects the mass balance, paleni malosi, operating schedule and local product route.
Operating schedule
Define planned hours per day, shutdown windows, cleaning strategy, labor model and feedstock storage capacity.
Malosiaga tuufaatasia
Evaluate non-condensable gas reuse, startup fuel, electrical loads, cooling demand and optional downstream energy use as one balance.
Quality control
Set sampling points for incoming material, condensate fractions, recovered solids, wastewater and exhaust gas.
Commercial boundary
Budgetary results remain conditional until the feedstock, nofoaga, product route and local compliance requirements are confirmed.
Va'ai le tuaoi o meafaigaluega feso'ota'i.
O fa'asinomaga va'aia e lagolago ai talanoaga fa'atulagaina vave. Meafaigaluega mulimuli, fa'atulagaina ma feso'ota'iga e fa'amaonia mai le meafaitino ma le nofoaga.
Fa'aliliu mea moni ole poloketi ile lisi o meafaigaluega.
O lenei matrix faasinomaga o loʻo faʻaalia ai le faʻatonuga o filifiliga. Vaega mulimuli, fa'ata'ita'iga ma feso'ota'iga o lo'o i totonu o le fa'atonuga o le poloketi.
| poloka faiga | lautele lautele | Fa'avae fa'atulagaina |
|---|---|---|
| Polymer preparation | Sorting, shredding, drying and removal of incompatible fractions | PE, PP, PS, PVC, PET and additive profile |
| Feed and conversion | Density control, sealed transfer, reactor and heating system | Bulk density, melt behavior and operating duty |
| Wax and liquid handling | Temperature-controlled vapor lines, staged condensation and storage | Wax tendency and target recovered-liquid route |
| Halogen and gas control | Material exclusion, corrosion review and gas-treatment provisions | PVC, brominated additives and local limits |
| Residue and utilities | Solid discharge, mālūlū, water and electrical interfaces | Residue classification and site conditions |
Fa'agasolo le galuega pe a maua fa'amaoniga mana'omia.
O faitoto'a ta'itasi e fa'aliliuina fa'amatalaga a tagata fa'atau i se fa'amatalaga fa'apitoa po'o fa'atau pisinisi mo le isi fa'ai'uga.
Polymer screen
Quantify target polymers, PVC, PET, additives, moisture and contamination.
Tuuina atuAccepted and excluded feed specificationAla vevela
Validate feeding, wax behavior, condensation and corrosion controls.
Tuuina atuMaterial-specific process routeProduct and permit
Confirm recovered-product status, outlets and local environmental boundary.
Tuuina atuCommercial and compliance evidence packConfiguration review
Freeze preparation, reactor, toe fa'aleleia, utilities and acceptance interfaces.
Tuuina atuProject configuration basisFesili e fofo a'o le'i faatulagaina.
O tali e fa'amatala ai le tuaoi fa'ainisinia; latou te le suitulaga i su'ega o meafaitino po'o iloiloga fa'alotoifale.
What determines the continuous pyrolysis equipment list?
Feedstock form, fatuga, susu, fa'aleagaina, planned operating schedule, recovered-product route, site utilities and permit requirements determine the configuration.
Can tires, plastics and oily sludge use exactly the same line?
Leai. They may share thermal-conversion principles, but their preparation, feeding, corrosion, condensation, solid handling and environmental controls differ materially.
Can recovered oil performance be guaranteed from a general material description?
Leai. Representative analysis and an agreed sampling method are required before recovered-liquid quantity, quality or downstream use can be evaluated.
What should be included in acceptance testing?
Define feedstock, run duration, mass balance, mautu o le faagaoioiga, sampled outputs, mea aoga, safety interlocks and the applicable emissions or residue tests.
Fa'amatala mea a'o le'i filifilia meafaigaluega.
Fa'asoa se fa'amatalaga o meafaitino, voluma avanoa, tulaga o nofoaga ma galuega fa'atino. YUSHUNXIN o le a faʻaogaina na mea moni e saunia ai le faʻasologa talafeagai o le faʻasologa ma le faʻatalanoaga faʻatulagaina.
