Do not treat a reactor name or daily capacity as a complete project specification.
Шикізат, дайындық, operating continuity, condensation, gas safety, product handling, қоршаған ортаны бақылау, utilities and local delivery scope must be configured together.
Approved small-scale reference
YSX-F1 to YSX-F5 denote 1, 2, 3, 4 және 5 t/day skid or modular planning references for tire, plastic or oily-sludge trials.
Material balance
Oil, газ, solids and metal-bearing outputs require representative feedstock, stable-run data and an agreed sampling boundary.
Commercial boundary
Prices, operating costs, product value and return require dated quotations and local market evidence.
Source control: approved YOTO group product register. Final parameters are issued on the project-specific technical agreement.
A continuous plastic-pyrolysis project adds controlled feeding, staged condensation, gas treatment and central controls. Uptime, energy demand, output routes and price require project confirmation.
How can sustainable plastic-to-fuel solutions deliver multiple benefits?
After formally entering the operational phase, the primary revenue streams for the plastic-to-fuel project include the following components.
Why Choose YUSHUNXIN?
We provide not only equipment but also turnkey solutions. These encompass raw material evaluation and process design, plant layout and equipment installation, operational training and maintenance guidance, as well as long-term technical optimization and after-sales service. Whether you are a plastic recycler, solid waste management company, or energy company in the circular economy, we can tailor the most cost-effective plastic-to-fuel project solution for you.
Сонымен қатар, we can provide you with numerous other waste recycling systems, сияқты eco-friendly ways to turn tires into fuel, шлам қалдықтарын пиролиз зауыты, күн панелінің пиролиз жобасының шешімі, және т.б. If you have any other requirements, feel free to contact us immediately!
PE-, PP- and selected PS-rich streams can follow different thermal and condensation behavior. PVC, PET, brominated plastics, medical plastics and e-waste plastics require separate assessment.
Follow the material, vapor, liquid, gas and solid paths
The reactor is one part of the line. Commercial operability depends on how each stream is prepared, transferred, controlled and discharged.
- 01Material characterization
- 02Feed preparation and sealed transfer
- 03Controlled thermal conversion
- 04Vapor separation and staged condensation
- 05Non-condensable gas safety and reuse
- 06Solid cooling, discharge and product handling
Configuration questions that change the proposal
The following points should be resolved before selecting a capacity or preparing a commercial quotation.
Polymer composition
Confirm PE, PP, PS, PVC and PET proportions instead of describing the feed simply as mixed plastic.
Halogen control
PVC and brominated additives can change corrosion, gas-cleaning and recovered-liquid requirements.
Wax management
Plastic-derived vapors and liquids may require temperature-controlled lines, insulation and condensation staging.
Product route
Define whether recovered liquid is intended for permitted fuel use, refinery feed evaluation or another locally accepted outlet.
Make utilities and product outlets visible before investment
A useful feasibility review connects the mass balance, энергия балансы, operating schedule and local product route.
Operating schedule
Define planned hours per day, shutdown windows, cleaning strategy, labor model and feedstock storage capacity.
Энергетикалық интеграция
Evaluate non-condensable gas reuse, startup fuel, electrical loads, cooling demand and optional downstream energy use as one balance.
Quality control
Set sampling points for incoming material, condensate fractions, recovered solids, wastewater and exhaust gas.
Commercial boundary
Budgetary results remain conditional until the feedstock, сайт, product route and local compliance requirements are confirmed.
Жалғанған жабдық шекарасын қараңыз.
Анықтамалық көрнекіліктер орналасуды ертерек талқылауды қолдайды. Соңғы жабдық, орналасуы мен интерфейстері жоба материалы мен сайтынан расталады.
Жоба фактілерін жабдық тізіміне аударыңыз.
Бұл анықтамалық матрица шешім логикасын көрсетеді. Соңғы шамалар, модельдер мен интерфейстер бекітілген жоба ұсынысына жатады.
| Жүйелік блок | Типтік ауқым | Конфигурация негізі |
|---|---|---|
| Polymer preparation | Sorting, shredding, drying and removal of incompatible fractions | PE, PP, PS, PVC, PET and additive profile |
| Feed and conversion | Density control, sealed transfer, reactor and heating system | Bulk density, melt behavior and operating duty |
| Wax and liquid handling | Temperature-controlled vapor lines, staged condensation and storage | Wax tendency and target recovered-liquid route |
| Halogen and gas control | Material exclusion, corrosion review and gas-treatment provisions | PVC, brominated additives and local limits |
| Residue and utilities | Solid discharge, салқындату, water and electrical interfaces | Residue classification and site conditions |
Қажетті дәлелдер болған кезде ғана жобаны алға жылжытыңыз.
Әрбір қақпа тұтынушы туралы ақпаратты келесі шешім үшін анықталған техникалық немесе коммерциялық нәтижеге айналдырады.
Polymer screen
Quantify target polymers, PVC, PET, additives, moisture and contamination.
ШығаруAccepted and excluded feed specificationЖылулық жол
Validate feeding, wax behavior, condensation and corrosion controls.
ШығаруMaterial-specific process routeProduct and permit
Confirm recovered-product status, outlets and local environmental boundary.
ШығаруCommercial and compliance evidence packConfiguration review
Freeze preparation, реактор, қалпына келтіру, utilities and acceptance interfaces.
ШығаруProject configuration basisКонфигурациядан бұрын шешілетін сұрақтар.
Жауаптар инженерлік шекараны анықтайды; олар репрезентативті материалды сынауды немесе жергілікті сәйкестікті тексеруді алмастырмайды.
What determines the continuous pyrolysis equipment list?
Feedstock form, құрамы, ылғал, ластану, planned operating schedule, recovered-product route, site utilities and permit requirements determine the configuration.
Can tires, plastics and oily sludge use exactly the same line?
Жоқ. They may share thermal-conversion principles, but their preparation, feeding, corrosion, condensation, solid handling and environmental controls differ materially.
Can recovered oil performance be guaranteed from a general material description?
Жоқ. Representative analysis and an agreed sampling method are required before recovered-liquid quantity, quality or downstream use can be evaluated.
What should be included in acceptance testing?
Define feedstock, run duration, mass balance, жұмыс тұрақтылығы, sampled outputs, коммуналдық қызметтер, safety interlocks and the applicable emissions or residue tests.
Define the material before selecting the equipment.
Share a representative material description, available volume, site status and target outputs. YUSHUNXIN will use those facts to prepare the relevant process boundary and configuration discussion.
