S1: Industrial Metal Decoating & Energy-Saving Melting Integration
Our UBC (Used Beverage Can) decoating system directly integrates with aluminum melting furnaces, creating a seamless closed-loop process. By removing coatings and contaminants before melting, the system maximizes metal recovery rates while reducing energy consumption by 15–30%. The decoating-melting linkage eliminates double handling, minimizes oxidation losses, and ensures higher-quality aluminum output for downstream applications.
Integrated Thermal Efficiency
UBC delacquering linked with melting furnace reduces gas consumption by 15-30%. The decoating system integrates directly with the melting furnace exhaust heat recovery system, creating a closed-loop thermal cycle. Hot flue gases from the melting furnace pre-heat the delacquering chamber, while the clean, decoated UBC enters the furnace at elevated temperature — reducing the energy required for melting. This thermal coupling eliminates the need for auxiliary burners in the delacquering stage and lowers overall natural gas consumption across the process chain.
Build the decoating line around the incoming aluminum scrap.
A connected project can combine size reduction, ferrous and non-ferrous separation, controlled thermal decoating, off-gas management, melting and ingot handling. The final scope depends on the coating system, scrap density, contamination and downstream metal specification.
From incoming UBC bales to a controlled furnace feed
The line should be configured as a material-to-output system rather than a standalone furnace.
- 01Receiving and bale opening
- 02Shredding and size control
- 03Magnetic and eddy-current separation
- 04Controlled thermal decoating
- 05Gas treatment and heat integration
- 06Optional melting, casting and palletizing
What changes the equipment list
A reliable proposal starts with the actual scrap profile and the agreed delivery boundary.
Feedstock form
Loose cans, compacted bales, mixed packaging scrap, painted profiles and oily turnings require different opening, feeding and separation arrangements.
Coating and contamination
Paint, ink, lacquer, polymer film, ນ້ຳມັນ, ຄວາມຊຸ່ມຊື່ນ, iron and non-metallic contamination influence residence time, gas handling and downstream metal cleaning.
Downstream route
Decoated scrap may be sold, remelted on site or integrated with refining, casting and automatic stacking. Each route changes utilities and layout.
Environmental boundary
The off-gas train must be selected against the coating chemistry, local permit basis, fuel system and required monitoring points.
Design decisions that protect metal value and operating stability
Published figures are planning references and require project confirmation. Representative feedstock testing and a documented acceptance basis are required.
Atmosphere control
Limit uncontrolled air ingress and monitor the thermal environment to reduce oxidation risk and maintain repeatable coating removal.
Material balance
Record incoming scrap, separated contaminants, decoated aluminum, residues and optional molten-metal output.
Heat integration
Evaluate recovered process gas and hot exhaust as project energy streams only after their composition and stability are understood.
Acceptance plan
Agree sampling, test method, run duration, product cleanliness, emissions boundary and utility conditions before commercial acceptance.
See the connected equipment boundary.
Reference visuals support early layout discussion. Final equipment, arrangement and interfaces are confirmed from the project material and site.
ແປຂໍ້ເທັດຈິງຂອງໂຄງການເຂົ້າໄປໃນບັນຊີລາຍຊື່ອຸປະກອນ.
ມາຕຣິກເບື້ອງອ້າງອີງນີ້ສະແດງໃຫ້ເຫັນເຫດຜົນການຕັດສິນໃຈ. ປະລິມານສຸດທ້າຍ, ແບບຈໍາລອງແລະການໂຕ້ຕອບຢູ່ໃນການສະເຫນີໂຄງການທີ່ໄດ້ຮັບການອະນຸມັດ.
| ບລັອກລະບົບ | ຂອບເຂດປົກກະຕິ | ພື້ນຖານການຕັ້ງຄ່າ |
|---|---|---|
| Material preparation | Bale opening, shredding, sizing and controlled transfer | Scrap form, density and required furnace feed |
| Separation | Magnetic, eddy-current and manual or sensor-based quality control | Iron, non-ferrous attachments and non-metallic contamination |
| Thermal section | Controlled decoating reactor, seals, heating and discharge | Coating load, residence basis and oxidation control |
| Environmental section | Gas combustion or oxidation, particulate and polishing stages | Coating chemistry and local emissions boundary |
| Downstream metal | Cooling, ການເກັບຮັກສາ, optional melting, casting and palletizing | Target product and agreed delivery scope |
ກ້າວຫນ້າໂຄງການພຽງແຕ່ເມື່ອມີຫຼັກຖານທີ່ຈໍາເປັນ.
ແຕ່ລະປະຕູປ່ຽນຂໍ້ມູນລູກຄ້າເປັນຜົນຜະລິດທາງວິຊາການຫຼືການຄ້າທີ່ກໍານົດໄວ້ສໍາລັບການຕັດສິນໃຈຕໍ່ໄປ.
Scrap profile
Confirm scrap category, coating, oils, attachments and incoming form.
ຜົນຜະລິດRepresentative scrap and contamination recordRoute definition
Define preparation, ແຍກ, decoating and downstream metal boundary.
ຜົນຜະລິດAgreed material-to-product flowEnvironmental basis
Identify coating chemistry, off-gas, residue and local test requirements.
ຜົນຜະລິດControl and monitoring registerAcceptance plan
Agree tested feed, sampling, stable run and downstream quality checks.
ຜົນຜະລິດMeasurable project acceptance sheetຄໍາຖາມເພື່ອແກ້ໄຂກ່ອນການຕັ້ງຄ່າ.
ຄໍາຕອບກໍານົດຂອບເຂດວິສະວະກໍາ; ພວກມັນບໍ່ທົດແທນການທົດສອບວັດສະດຸທີ່ເປັນຕົວແທນຫຼືການທົບທວນການປະຕິບັດຕາມທ້ອງຖິ່ນ.
What information is required to configure an aluminum decoating line?
Provide the scrap category, coating or oil condition, bale or particle dimensions, contamination, ປະລິມານທີ່ມີຢູ່, downstream metal route, site utilities and local environmental basis.
Can one standard line process every type of aluminum scrap?
ບໍ່. UBC bales, painted profiles, automotive scrap and oily turnings can require different opening, ແຍກ, feeding, thermal and gas-treatment arrangements.
Is melting and ingot casting always included?
ບໍ່. The project can stop at cleaned scrap or include melting, refining, casting and palletizing when those interfaces are part of the agreed scope.
How should project acceptance be defined?
Acceptance should state the tested feedstock, sampling method, stable operating period, material balance, product-cleanliness basis, utility conditions and environmental measurement boundary.
ກໍານົດວັດສະດຸກ່ອນທີ່ຈະເລືອກອຸປະກອນ.
ແບ່ງປັນລາຍລະອຽດເອກະສານຕົວແທນ, ປະລິມານທີ່ມີຢູ່, ສະຖານະພາບຂອງສະຖານທີ່ແລະຜົນໄດ້ຮັບເປົ້າຫມາຍ. YUSHUNXIN ຈະນໍາໃຊ້ຂໍ້ເທັດຈິງເຫຼົ່ານັ້ນເພື່ອກະກຽມການສົນທະນາຂອບເຂດຂະບວນການທີ່ກ່ຽວຂ້ອງແລະການຕັ້ງຄ່າ.
