S1: Industrial Metal Decoating & Energy-Saving Melting Integration
Our UBC (Used Beverage Can) decoating system directly integrates with aluminum melting furnaces, creating a seamless closed-loop process. By removing coatings and contaminants before melting, the system maximizes metal recovery rates while reducing energy consumption by 15–30%. The decoating-melting linkage eliminates double handling, minimizes oxidation losses, and ensures higher-quality aluminum output for downstream applications.
Integrated Thermal Efficiency
UBC delacquering linked with melting furnace reduces gas consumption by 15-30%. The decoating system integrates directly with the melting furnace exhaust heat recovery system, creating a closed-loop thermal cycle. Hot flue gases from the melting furnace pre-heat the delacquering chamber, while the clean, decoated UBC enters the furnace at elevated temperature — reducing the energy required for melting. This thermal coupling eliminates the need for auxiliary burners in the delacquering stage and lowers overall natural gas consumption across the process chain.
Build the decoating line around the incoming aluminum scrap.
A connected project can combine size reduction, ferrous and non-ferrous separation, controlled thermal decoating, off-gas management, melting and ingot handling. The final scope depends on the coating system, scrap density, contamination and downstream metal specification.
From incoming UBC bales to a controlled furnace feed
The line should be configured as a material-to-output system rather than a standalone furnace.
- 01Receiving and bale opening
- 02Shredding and size control
- 03Magnetic and eddy-current separation
- 04Controlled thermal decoating
- 05Gas treatment and heat integration
- 06Optional melting, casting and palletizing
What changes the equipment list
A reliable proposal starts with the actual scrap profile and the agreed delivery boundary.
原料の形態
Loose cans, compacted bales, mixed packaging scrap, painted profiles and oily turnings require different opening, feeding and separation arrangements.
Coating and contamination
Paint, インク, lacquer, polymer film, 油, 水分, iron and non-metallic contamination influence residence time, gas handling and downstream metal cleaning.
Downstream route
Decoated scrap may be sold, remelted on site or integrated with refining, casting and automatic stacking. Each route changes utilities and layout.
Environmental boundary
The off-gas train must be selected against the coating chemistry, local permit basis, fuel system and required monitoring points.
Design decisions that protect metal value and operating stability
Published figures are planning references and require project confirmation. Representative feedstock testing and a documented acceptance basis are required.
Atmosphere control
Limit uncontrolled air ingress and monitor the thermal environment to reduce oxidation risk and maintain repeatable coating removal.
マテリアルバランス
Record incoming scrap, separated contaminants, decoated aluminum, residues and optional molten-metal output.
Heat integration
Evaluate recovered process gas and hot exhaust as project energy streams only after their composition and stability are understood.
Acceptance plan
Agree sampling, test method, 実行時間, product cleanliness, emissions boundary and utility conditions before commercial acceptance.
接続された機器の境界を確認する.
初期のレイアウトに関する議論をサポートするリファレンス ビジュアル. 最終装備, 配置やインターフェースはプロジェクト資料やサイトから確認.
プロジェクトの事実を機器リストに変換する.
この参照マトリックスは決定ロジックを示しています. 最終数量, モデルとインターフェースは承認されたプロジェクト提案に含まれます.
| システムブロック | 一般的な範囲 | 構成ベース |
|---|---|---|
| Material preparation | Bale opening, 細断, sizing and controlled transfer | Scrap form, density and required furnace feed |
| 分離 | Magnetic, eddy-current and manual or sensor-based quality control | Iron, non-ferrous attachments and non-metallic contamination |
| Thermal section | Controlled decoating reactor, seals, heating and discharge | Coating load, residence basis and oxidation control |
| Environmental section | Gas combustion or oxidation, particulate and polishing stages | Coating chemistry and local emissions boundary |
| Downstream metal | 冷却, ストレージ, optional melting, casting and palletizing | Target product and agreed delivery scope |
必要な証拠が入手可能な場合にのみプロジェクトを進める.
各ゲートは、顧客情報を次の意思決定のために定義された技術的または商業的な成果物に変換します。.
Scrap profile
Confirm scrap category, コーティング, oils, attachments and incoming form.
出力Representative scrap and contamination recordRoute definition
Define preparation, 分離, decoating and downstream metal boundary.
出力Agreed material-to-product flowEnvironmental basis
Identify coating chemistry, off-gas, residue and local test requirements.
出力Control and monitoring registerAcceptance plan
Agree tested feed, sampling, stable run and downstream quality checks.
出力Measurable project acceptance sheet構成前に解決すべき質問.
答えはエンジニアリングの境界を定義します; これらは、代表的な材料試験や現地のコンプライアンスレビューに代わるものではありません。.
What information is required to configure an aluminum decoating line?
Provide the scrap category, coating or oil condition, bale or particle dimensions, 汚染, 利用可能なボリューム, downstream metal route, site utilities and local environmental basis.
Can one standard line process every type of aluminum scrap?
いいえ. UBCベール, painted profiles, automotive scrap and oily turnings can require different opening, 分離, 餌やり, thermal and gas-treatment arrangements.
Is melting and ingot casting always included?
いいえ. The project can stop at cleaned scrap or include melting, refining, casting and palletizing when those interfaces are part of the agreed scope.
How should project acceptance be defined?
Acceptance should state the tested feedstock, sampling method, stable operating period, material balance, product-cleanliness basis, utility conditions and environmental measurement boundary.
機器を選択する前に材料を定義してください.
代表的な材料の説明を共有する, 利用可能なボリューム, サイトのステータスと目標の出力. YUSHUNXIN はこれらの事実を使用して、関連するプロセス境界と構成に関する議論を準備します。.
