PROJECT-SPECIFIC THERMAL SYSTEM

Do not treat a reactor name or daily capacity as a complete project specification.

Eupan, preparation, operating continuity, condensation, gas safety, product handling, kadali lingkungan, utilities and local delivery scope must be configured together.

A

Approved small-scale reference

YSX-F1 to YSX-F5 denote 1, 2, 3, 4 jeung 5 t/day skid or modular planning references for tire, plastic or oily-sludge trials.

B

Material balance

Oil, gas, solids and metal-bearing outputs require representative feedstock, stable-run data and an agreed sampling boundary.

C

Commercial boundary

Prices, operating costs, product value and return require dated quotations and local market evidence.

Source control: approved YOTO group product register. Final parameters are issued on the project-specific technical agreement.

The HTP-1000 name is retained as a project reference. throughput stabil, dryer duty, reactor configuration, gas treatment, controls and price require representative sludge analysis and a written quotation.

  • The system has an annual production capacity of approximately 2,000 tons of pyrolytic charcoal, which holds significant market value. Saterasna, through energy recovery and carbon fixing process, it reduces carbon dioxide emissions by about 1,500 tons annually, which achieves the goal of ecological and economic coordination.

    • 1000 kgh Sludge Pyrolysis Production Line

    What are the differences in efficiency between continuous and intermittent pyrolysis systems?

    In pyrolysis solutions for municipal sludge treatment projects, different pyrolysis process routes directly impact operational efficiency and product quality. Among these, continuous and batch pyrolysis systems represent two typical operating modes, each with unique technical characteristics and applicable scenarios.

    Comparison of Continuous and Batch Pyrolysis Systems

    Intermittent pyrolysis systems primarily operate in batches. After completing each batch of processing, it is necessary to remove residues, feed new material, and restart the next cycle. Its advantages include simple structure, low equipment investment, and easy commissioning, which is suitable for small-scale processing.

    In contrast, continuous pyrolysis systems utilize screw conveyors for continuous sludge feeding, so that the pyrolysis reaction proceeds under constant conditions. While the system design is more complex, it significantly enhances processing capacity and operational stability, which is suitable for medium to large-scale sludge treatment projects.

    Continuous pyrolysis systems offer significant advantages in energy utilization. There is less heat loss because the reaction temperature can remain within a relatively stable range. Dina waktos anu sasarengan, the residual heat from pyrolysis can maintain the reaction temperature, so as to realize energy self-sufficiency.

    While in the intermittent system, each heating and cooling cycle causes significant energy fluctuations, resulting in obvious heat loss. Ku kituna, if there is no comprehensive waste heat recovery mechanism, the energy consumption for treating a unit of sludge will be higher.

    Continuous pyrolysis systems enable stable control of parameters such as temperature, residence time, and atmosphere, so the quality of pyrolysis products will be more consistent. Temperature and atmosphere fluctuations in batch systems are relatively sharp, so it is difficult to achieve precise control. This may bring uncertainty to subsequent resource recovery processes. On the other hand, intermittent systems offer flexible operation, and facilitate optimization of process parameters, which is suitable for experimental processing of diverse raw materials.

    We not only focus on sludge pyrolysis treatment but also possess extensive experience in solid waste resource recovery, sapertos sistem pirolisis ban runtah jeung pabrik pirolisis limbah plastik. Contact us immediately to customize your own sistem manajemén runtah éléktronik.

    YUSHUNXIN
    YUSHUNXIN THERMAL CONVERSION

    Drilling waste, tank-bottom sludge, refinery sludge and marine oily residues differ in water, padet, hydrocarbons, salt, sulfur and metals. They should not share an assumed standard configuration.

    Reference three-dimensional layout of a continuous thermal conversion line
    01 / CONNECTED PROCESS

    Follow the material, vapor, liquid, gas and solid paths

    The reactor is one part of the line. Commercial operability depends on how each stream is prepared, transferred, controlled and discharged.

    1. 01Material characterization
    2. 02Feed preparation and sealed transfer
    3. 03Controlled thermal conversion
    4. 04Vapor separation and staged condensation
    5. 05Non-condensable gas safety and reuse
    6. 06Solid cooling, discharge and product handling
    02 / MATERIAL-SPECIFIC DESIGN

    Configuration questions that change the proposal

    The following points should be resolved before selecting a capacity or preparing a commercial quotation.

    Conditioning and dewatering

    High water content changes feeding stability and energy demand; pumping, mixing, dewatering or screw feeding may be required.

    Fouling and corrosion

    Salt, fine solids and heavy fractions influence reactor cleaning, metallurgy and condensation-system maintenance.

    Recovered phases

    Separate the project basis for recovered oil, water and treated solids, including sampling and permitted downstream use.

    Hazardous-waste boundary

    Licensing, residue classification, worker protection and emissions monitoring must be defined for the project jurisdiction.

    03 / OPERATING MODEL

    Make utilities and product outlets visible before investment

    A useful feasibility review connects the mass balance, kasaimbangan énergi, operating schedule and local product route.

    Operating schedule

    Define planned hours per day, shutdown windows, cleaning strategy, labor model and feedstock storage capacity.

    Integrasi énergi

    Evaluate non-condensable gas reuse, startup fuel, electrical loads, cooling demand and optional downstream energy use as one balance.

    Quality control

    Set sampling points for incoming material, condensate fractions, recovered solids, wastewater and exhaust gas.

    Commercial boundary

    Budgetary results remain conditional until the feedstock, situs, product route and local compliance requirements are confirmed.

    PROYEK VISUAL

    Tempo wates alat disambungkeun.

    Rujukan visuals ngarojong sawala perenah mimiti. parabot ahir, susunan jeung interfaces dikonfirmasi ti bahan proyék jeung loka.

    Reference equipment view for early configuration discussion.
    Reference process evidence; final outputs and interfaces remain material- and project-specific.
    Konfigurasi rujukan

    Tarjamahkeun fakta proyék kana daptar alat.

    Matriks rujukan ieu nunjukkeun logika kaputusan. Jumlah ahir, model na interfaces milik dina proposal proyék disatujuan.

    Blok sistemwengkuan hasDasar konfigurasi
    Receiving and conditioningSampling, mixing, screening, dewatering or pumpable-feed preparationWater, padet, salts and viscosity
    Controlled feedingAgitated buffer, pumps or screws, seals and isolationPhase stability and hazardous-waste controls
    perlakuan termalReactor, heating, fouling management and cleanout accessHydrocarbon range, solids and corrosion basis
    Phase recoveryVapor separation, oil-water handling and treated-solid coolingSampling and permitted downstream routes
    Environmental and residueGas treatment, wastewater, residue containment and monitoringLocal licensing and acceptance tests
    PATH-GATE PUTUSAN JALAN

    Majukeun proyek ngan lamun bukti diperlukeun geus sadia.

    Unggal Gerbang kabukti informasi customer kana kaluaran teknis atanapi komérsial diartikeun pikeun kaputusan salajengna.

    01

    Waste characterization

    Sample water, minyak, padet, salts, walirang, metals and hazardous properties.

    KaluaranRepresentative waste profile
    02

    Conditioning trial

    Verify mixing, dewatering, pumping or screw-feeding requirements.

    KaluaranStable feed-preparation route
    03

    Output controls

    Define recovered phases, treated residue, wastewater and sampling methods.

    KaluaranPermitted output-management plan
    04

    Facility integration

    Confirm licensing, containment, utilitas, monitoring and acceptance.

    KaluaranSite-specific technical boundary
    FAQ PROYEK

    Patarosan pikeun ngabéréskeun sateuacan konfigurasi.

    Jawaban nangtukeun wates rékayasa; aranjeunna henteu ngagentos tes bahan perwakilan atanapi tinjauan kasesuaian lokal.

    What determines the continuous pyrolysis equipment list?

    Feedstock form, komposisi, kalembaban, contamination, planned operating schedule, recovered-product route, site utilities and permit requirements determine the configuration.

    Can tires, plastics and oily sludge use exactly the same line?

    No. They may share thermal-conversion principles, but their preparation, feeding, corrosion, condensation, solid handling and environmental controls differ materially.

    Can recovered oil performance be guaranteed from a general material description?

    No. Representative analysis and an agreed sampling method are required before recovered-liquid quantity, quality or downstream use can be evaluated.

    What should be included in acceptance testing?

    Define feedstock, run duration, mass balance, stabilitas operasi, sampled outputs, utilitas, safety interlocks and the applicable emissions or residue tests.

    REVIEW PROYEK Téknik

    Nangtukeun bahan sateuacan milih alat.

    Bagikeun pedaran bahan perwakilan, volume sadia, status situs jeung outputs target. YUSHUNXIN bakal ngagunakeun fakta-fakta éta pikeun nyiapkeun wates prosés sareng diskusi konfigurasi anu relevan.

    Mimitian Review Project