Every year the world generates hundreds of millions of waste tyres. Due to their resistance to wear and ageing, tyres are difficult to degrade naturally. So they are known as “black pollution”. If we do not address the problem, these tyres will accumulate over time, which will waste land resources and even cause environmental pollution. Traditional methods of burning or landfilling waste not only squander energy but also release significant quantities of harmful gases. تاہم, our eco-friendly ways to turn tires into fuel are changing this situation. Through a scientific pyrolysis process, we can break down waste tyres into reusable fuel oil, carbon black and combustible gases, thereby achieving the circular regeneration of resources.
What is the eco-friendly ways to turn tires into fuel?
The core method of the waste tire pyrolysis system is pyrolysis technology. It achieves this by heating tires under anaerobic or hypoxic conditions, so that the rubber molecular chains break down and rearrange, yielding multiple usable energy products. The entire process requires no combustion, thus avoiding secondary pollution. The method comprises the following five principal stages.
1. پری علاج
2. Pyrolysis Reaction
3. Condensation and Oil-Gas Separation
4. Exhaust Gas Purification
5. Carbon Black Collection and Processing
How to configure equipment for different production capacities?
There are two standard production capacity solutions depending on the scale of the client’s project and investment budget. We also can customise these eco-friendly ways to turn tires into fuel to suit your specific requirements. Please feel free to contact us at any time.
500 kg/h Pyrolysis Unit
The equipment can process approximately 500 kilograms of waste tyres per hour. Operating for 20 hours daily, it can process around 10 tonnes of waste tyres. The approximate output proportions are as follows: pyrolysis fuel oil 40%, carbon black 35%, with the remaining 25% comprising steel wire and combustible gases.
The main equipment comprises an automatic feeding system, horizontal pyrolysis reactor, condensation cooling system, exhaust gas purification unit, carbon black cooling collector, and PLC automated control system. The reference price for the complete system is approximately $38,000–55,000.
Advantages:
1000kg/h Continuous Pyrolysis Unit
The entire system can process approximately 1,000 kilograms of waste tyres per hour. Operating for 20 hours daily, the daily processing capacity reaches approximately 20 tonnes. The reference output ratio is as follows: pyrolysis fuel oil approximately 40%, carbon black approximately 35%, steel wire and combustible gas approximately 25%.
Key configurations comprise automatic feeders with conveying systems, continuous pyrolysis reactors, multi-stage condensation recovery systems, exhaust gas combustion and purification units, automatic carbon black collection lines, PLC intelligent control systems, and oil-water separation. The reference price for the complete equipment ranges from approximately $68,000 کو $95,000, which depends on the configuration and level of automation.
Advantages:
Why Choose Us?
YUSHUNXIN possesses over a decade of experience in the research, development and export of pyrolysis equipment, and has a comprehensive production system. مزید یہ کہ, the company holds ISO 9001, CE certification, and ISO 14001, which ensures that the entire process of equipment design, مینوفیکچرنگ, and operation complies with international standards. سب سے اہم بات, we develop and manufacture the core components of the machinery ourselves, so the entire equipment set ensures high quality while offering superior value for money. With its stable performance and perfect after-sales service, the company’s products have been exported to numerous countries in Southeast Asia, Africa and Europe, and established an extensive global service network.
The project boundary can include feed preparation, sealed feeding, continuous thermal conversion, vapor cleaning and condensation, non-condensable gas reuse, solid discharge and recovered carbon handling.
Follow the material, vapor, liquid, gas and solid paths
The reactor is one part of the line. Commercial operability depends on how each stream is prepared, transferred, controlled and discharged.
- 01Material characterization
- 02Feed preparation and sealed transfer
- 03Controlled thermal conversion
- 04Vapor separation and staged condensation
- 05Non-condensable gas safety and reuse
- 06Solid cooling, discharge and product handling
Configuration questions that change the proposal
The following points should be resolved before selecting a capacity or preparing a commercial quotation.
Steel and textile control
Whole tires, cut tires and tire-derived fuel impose different shredding, wire separation and feeding requirements.
Carbon and dust handling
Solid discharge, cooling and enclosed transfer must be designed to prevent hot spots, dust release and downstream blockage.
Recovered oil use
Storage, filtration and any intended fuel or refining route must be evaluated under the local product and environmental framework.
Gas safety
Pressure control, water sealing or equivalent safeguards, flame monitoring and emergency isolation belong in the system scope.
Make utilities and product outlets visible before investment
A useful feasibility review connects the mass balance, energy balance, operating schedule and local product route.
Operating schedule
Define planned hours per day, shutdown windows, cleaning strategy, labor model and feedstock storage capacity.
Energy integration
Evaluate non-condensable gas reuse, startup fuel, electrical loads, cooling demand and optional downstream energy use as one balance.
Quality control
Set sampling points for incoming material, condensate fractions, recovered solids, wastewater and exhaust gas.
تجارتی حد
Budgetary results remain conditional until the feedstock, سائٹ, product route and local compliance requirements are confirmed.
See the connected equipment boundary.
Reference visuals support early layout discussion. Final equipment, arrangement and interfaces are confirmed from the project material and site.
پروجیکٹ کے حقائق کو سامان کی فہرست میں ترجمہ کریں۔.
یہ ریفرنس میٹرکس فیصلے کی منطق کو ظاہر کرتا ہے۔. حتمی مقداریں, ماڈل اور انٹرفیس منظور شدہ پروجیکٹ کی تجویز میں شامل ہیں۔.
| سسٹم بلاک | عام دائرہ کار | ترتیب کی بنیاد |
|---|---|---|
| Tire preparation | Whole-tire feeding or shredding, steel control and buffer storage | Tire format, contamination and operating continuity |
| Sealed conversion | Metered feeding, ری ایکٹر, heating and emergency isolation | Rubber composition and planned duty |
| Oil and gas | Vapor cleaning, staged condensation, gas safety and storage | Water, سلفر, solids and intended liquid route |
| Recovered carbon | Sealed cooling, steel separation, sizing and enclosed handling | Buyer specification and dust-control basis |
| ماحولیاتی نظام | Combustion, particulate control, wastewater and monitoring points | Local permit and acceptance boundary |
مطلوبہ ثبوت دستیاب ہونے پر ہی پروجیکٹ کو آگے بڑھائیں۔.
ہر گیٹ اگلے فیصلے کے لیے کسٹمر کی معلومات کو ایک متعین تکنیکی یا تجارتی آؤٹ پٹ میں بدل دیتا ہے۔.
Feedstock evidence
Document tire format, steel, contamination, storage and available volume.
آؤٹ پٹQualified tire-feed basisپروڈکٹ کے راستے
Confirm lawful outlets and test methods for liquid, گیس, carbon and steel.
آؤٹ پٹOutput qualification registerSite and permits
Define utilities, fire controls, اخراج, wastewater and residue boundary.
آؤٹ پٹSite-readiness and compliance listConfiguration review
Translate verified facts into equipment, interfaces and exclusions.
آؤٹ پٹTraceable technical proposal basisکنفیگریشن سے پہلے حل کرنے کے لیے سوالات.
جوابات انجینئرنگ کی حد کی وضاحت کرتے ہیں۔; وہ نمائندہ مواد کی جانچ یا مقامی تعمیل کے جائزے کی جگہ نہیں لیتے ہیں۔.
What determines the continuous pyrolysis equipment list?
Feedstock form, مرکب, نمی, contamination, planned operating schedule, recovered-product route, site utilities and permit requirements determine the configuration.
Can tires, plastics and oily sludge use exactly the same line?
نہیں. They may share thermal-conversion principles, but their preparation, feeding, corrosion, گاڑھا ہونا, solid handling and environmental controls differ materially.
Can recovered oil performance be guaranteed from a general material description?
نہیں. Representative analysis and an agreed sampling method are required before recovered-liquid quantity, quality or downstream use can be evaluated.
What should be included in acceptance testing?
Define feedstock, run duration, mass balance, operating stability, sampled outputs, افادیت, safety interlocks and the applicable emissions or residue tests.
سامان کو منتخب کرنے سے پہلے مواد کی وضاحت کریں۔.
نمائندہ مواد کی وضاحت کا اشتراک کریں۔, دستیاب حجم, سائٹ کی حیثیت اور ہدف کے نتائج. YUSHUNXIN ان حقائق کو متعلقہ عمل کی حد اور ترتیب کی بحث کو تیار کرنے کے لیے استعمال کرے گا۔.
