هر سال در جهان صدها میلیون لاستیک زباله تولید می شود. به دلیل مقاومت در برابر سایش و پیری, لاستیک ها به سختی تخریب می شوند. بنابراین آنها به عنوان "آلودگی سیاه" شناخته می شوند.. اگر به مشکل رسیدگی نکنیم, این لاستیک ها به مرور زمان جمع می شوند, که باعث هدر رفتن منابع زمین و حتی آلودگی محیط زیست می شود. روش‌های سنتی سوزاندن یا دفن زباله‌ها نه تنها انرژی را هدر می‌دهند، بلکه مقادیر قابل توجهی گازهای مضر را نیز آزاد می‌کنند.. با این حال, راه های سازگار با محیط زیست ما برای تبدیل لاستیک ها به سوخت در حال تغییر این وضعیت است. از طریق یک فرآیند پیرولیز علمی, ما می توانیم لاستیک های زباله را به روغن سوخت قابل استفاده مجدد تجزیه کنیم, کربن سیاه و گازهای قابل احتراق, در نتیجه به بازسازی دایره ای منابع دست می یابد.
راه های سازگار با محیط زیست برای تبدیل لاستیک ها به سوخت چیست؟?
روش اصلی از سیستم پیرولیز لاستیک زباله تکنولوژی پیرولیز است. این امر با گرم کردن لاستیک ها در شرایط بی هوازی یا هیپوکسیک به دست می آید, به طوری که زنجیره های مولکولی لاستیک شکسته شده و دوباره مرتب می شوند, تولید چندین محصول انرژی قابل استفاده. کل فرآیند نیازی به احتراق ندارد, بنابراین از آلودگی ثانویه جلوگیری می شود. این روش شامل پنج مرحله اصلی زیر است.
1. قبل از درمان
2. واکنش پیرولیز
3. چگالش و جداسازی نفت و گاز
4. تصفیه گاز اگزوز
5. مجموعه و پردازش کربن سیاه
نحوه پیکربندی تجهیزات برای ظرفیت های مختلف تولید?
There are two standard production capacity solutions depending on the scale of the client’s project and investment budget. We also can customise these eco-friendly ways to turn tires into fuel to suit your specific requirements. Please feel free to contact us at any time.
500 kg/h Pyrolysis Unit
The equipment can process approximately 500 kilograms of waste tyres per hour. Operating for 20 hours daily, it can process around 10 tonnes of waste tyres. The approximate output proportions are as follows: pyrolysis fuel oil 40%, کربن سیاه 35%, with the remaining 25% comprising steel wire and combustible gases.
The main equipment comprises an automatic feeding system, horizontal pyrolysis reactor, condensation cooling system, exhaust gas purification unit, carbon black cooling collector, and PLC automated control system. The reference price for the complete system is approximately $38,000–55,000.
مزایا:
1000kg/h Continuous Pyrolysis Unit
The entire system can process approximately 1,000 kilograms of waste tyres per hour. Operating for 20 hours daily, the daily processing capacity reaches approximately 20 tonnes. The reference output ratio is as follows: pyrolysis fuel oil approximately 40%, carbon black approximately 35%, steel wire and combustible gas approximately 25%.
Key configurations comprise automatic feeders with conveying systems, continuous pyrolysis reactors, multi-stage condensation recovery systems, exhaust gas combustion and purification units, automatic carbon black collection lines, PLC intelligent control systems, and oil-water separation. The reference price for the complete equipment ranges from approximately $68,000 به $95,000, which depends on the configuration and level of automation.
مزایا:
Why Choose Us?
YUSHUNXIN possesses over a decade of experience in the research, development and export of pyrolysis equipment, and has a comprehensive production system. علاوه بر این, the company holds ISO 9001, CE certification, and ISO 14001, which ensures that the entire process of equipment design, manufacturing, and operation complies with international standards. Most importantly, we develop and manufacture the core components of the machinery ourselves, so the entire equipment set ensures high quality while offering superior value for money. With its stable performance and perfect after-sales service, the company’s products have been exported to numerous countries in Southeast Asia, Africa and Europe, and established an extensive global service network.
The project boundary can include feed preparation, sealed feeding, continuous thermal conversion, vapor cleaning and condensation, non-condensable gas reuse, solid discharge and recovered carbon handling.
Follow the material, vapor, liquid, gas and solid paths
The reactor is one part of the line. Commercial operability depends on how each stream is prepared, transferred, controlled and discharged.
- 01Material characterization
- 02Feed preparation and sealed transfer
- 03Controlled thermal conversion
- 04Vapor separation and staged condensation
- 05Non-condensable gas safety and reuse
- 06Solid cooling, discharge and product handling
Configuration questions that change the proposal
The following points should be resolved before selecting a capacity or preparing a commercial quotation.
Steel and textile control
Whole tires, cut tires and tire-derived fuel impose different shredding, wire separation and feeding requirements.
Carbon and dust handling
Solid discharge, cooling and enclosed transfer must be designed to prevent hot spots, dust release and downstream blockage.
Recovered oil use
Storage, filtration and any intended fuel or refining route must be evaluated under the local product and environmental framework.
Gas safety
Pressure control, water sealing or equivalent safeguards, flame monitoring and emergency isolation belong in the system scope.
Make utilities and product outlets visible before investment
A useful feasibility review connects the mass balance, energy balance, operating schedule and local product route.
Operating schedule
Define planned hours per day, shutdown windows, cleaning strategy, labor model and feedstock storage capacity.
Energy integration
Evaluate non-condensable gas reuse, startup fuel, electrical loads, cooling demand and optional downstream energy use as one balance.
Quality control
Set sampling points for incoming material, condensate fractions, recovered solids, wastewater and exhaust gas.
Commercial boundary
Budgetary results remain conditional until the feedstock, سایت, product route and local compliance requirements are confirmed.
See the connected equipment boundary.
Reference visuals support early layout discussion. Final equipment, arrangement and interfaces are confirmed from the project material and site.
Translate project facts into an equipment list.
This reference matrix shows the decision logic. Final quantities, models and interfaces belong in the approved project proposal.
| System block | Typical scope | Configuration basis |
|---|---|---|
| Tire preparation | Whole-tire feeding or shredding, steel control and buffer storage | Tire format, contamination and operating continuity |
| Sealed conversion | Metered feeding, reactor, heating and emergency isolation | Rubber composition and planned duty |
| Oil and gas | Vapor cleaning, staged condensation, gas safety and storage | Water, sulfur, solids and intended liquid route |
| Recovered carbon | Sealed cooling, steel separation, sizing and enclosed handling | Buyer specification and dust-control basis |
| سیستم های زیست محیطی | Combustion, particulate control, wastewater and monitoring points | Local permit and acceptance boundary |
Advance the project only when the required evidence is available.
Each gate turns customer information into a defined technical or commercial output for the next decision.
Feedstock evidence
Document tire format, steel, آلودگی, storage and available volume.
OutputQualified tire-feed basisProduct routes
Confirm lawful outlets and test methods for liquid, گاز, carbon and steel.
OutputOutput qualification registerSite and permits
Define utilities, fire controls, emissions, wastewater and residue boundary.
OutputSite-readiness and compliance listConfiguration review
Translate verified facts into equipment, interfaces and exclusions.
OutputTraceable technical proposal basisQuestions to resolve before configuration.
Answers define the engineering boundary; they do not replace representative material testing or local compliance review.
What determines the continuous pyrolysis equipment list?
Feedstock form, ترکیب, رطوبت, آلودگی, planned operating schedule, recovered-product route, site utilities and permit requirements determine the configuration.
Can tires, plastics and oily sludge use exactly the same line?
No. They may share thermal-conversion principles, but their preparation, feeding, corrosion, condensation, solid handling and environmental controls differ materially.
Can recovered oil performance be guaranteed from a general material description?
No. Representative analysis and an agreed sampling method are required before recovered-liquid quantity, quality or downstream use can be evaluated.
What should be included in acceptance testing?
Define feedstock, run duration, mass balance, operating stability, sampled outputs, آب و برق, safety interlocks and the applicable emissions or residue tests.
Define the material before selecting the equipment.
Share a representative material description, available volume, site status and target outputs. YUSHUNXIN will use those facts to prepare the relevant process boundary and configuration discussion.
