Configure carbon production, process-gas treatment, boiler duty and the customer steam load as a connected system.
Turn stable carbonization heat into useful industrial steam.
A steam project should be designed around the receiving process load. Carbonization gas, supplementary fuel, boiler duty, water treatment and backup capacity must work as one operating system.
Keep carbon quality and steam reliability under separate control
The carbonizer creates the primary product; the energy train converts suitable process gas and heat into a controlled utility.
- 01Biomass drying and feeding
- 02Continuous carbonization
- 03Dust and condensable separation
- 04Gas cleaning and controlled combustion
- 05Steam generation and water treatment
- 06Distribution, metering and backup supply
Define the user before defining the boiler
Food and chemical plants require a clear hourly steam profile, 압력, quality and continuity basis.
Steam demand
Provide minimum, normal and peak demand, operating hours, 압력, temperature and seasonal production schedule.
Water system
Define raw-water quality, treatment, deaeration, blowdown, condensate return and make-up-water capacity.
Fuel stability
Gas cleaning, buffer volume, burner turndown and supplementary fuel determine pressure stability during feed or quality changes.
Interface boundary
Agree the battery limit for boiler house, steam header, metering, condensate return, civil works and operating responsibility.
Verify both carbon output and usable steam
Acceptance should be based on documented feedstock, operating conditions and measurement methods.
Carbon product
Record yield and product properties only against the tested biomass and agreed thermal program.
Steam output
Meter flow, pressure and temperature during a defined stable operating window instead of using theoretical heat alone.
Emissions boundary
Identify combustion, particulate and condensable controls and the local monitoring or permit requirements.
Continuity plan
Define startup, shutdown, maintenance, low-gas operation and backup-steam behavior for the receiving plant.
연결된 장비 경계 보기.
참조 시각적 자료는 초기 레이아웃 논의를 지원합니다.. 최종 장비, 배치 및 인터페이스는 프로젝트 자료 및 현장에서 확인됩니다..
프로젝트 정보를 장비 목록으로 변환.
이 참조 매트릭스는 결정 논리를 보여줍니다.. 최종 수량, 모델과 인터페이스는 승인된 프로젝트 제안에 속합니다..
| 시스템 블록 | 일반적인 범위 | 구성기준 |
|---|---|---|
| Gas preparation | 먼지, condensable and moisture control with safe buffering | Carbonization-gas variability and burner limits |
| Combustion system | Controlled burner, combustion chamber and safety interlocks | Steam duty, turndown and supplementary-fuel plan |
| Boiler island | Boiler, economizer, blowdown, instruments and protection | Pressure, temperature and operating code basis |
| Water and condensate | Treatment, deaeration, make-up water and condensate return | Source-water quality and user return conditions |
| Steam delivery | Header, metering, pressure control and backup interface | 최저한의, normal and peak customer demand |
필요한 증거가 있는 경우에만 프로젝트를 진행하세요..
각 게이트는 고객 정보를 다음 결정을 위해 정의된 기술 또는 상업적 출력으로 전환합니다..
Load profile
Capture minimum, normal and peak demand plus continuity requirements.
산출Metered or documented steam-demand basisEnergy balance
Match process-gas availability, internal heat demand and backup fuel.
산출Verified preliminary heat balanceUtility design
Define boiler, 물, condensate, header and emissions interfaces.
산출Connected utility configurationAcceptance plan
Agree test feedstock, stable window, meters and backup behavior.
산출Measurable project acceptance sheet구성 전에 해결해야 할 질문.
답변은 엔지니어링 경계를 정의합니다; 이는 대표적인 재료 테스트 또는 현지 규정 준수 검토를 대체하지 않습니다..
What information is needed from the steam user?
Provide minimum, normal and peak steam demand, 압력, temperature, 운영 일정, condensate return, water quality and continuity requirement.
Can process gas alone guarantee continuous steam supply?
Not without verification. Buffering, burner turndown, supplementary fuel and backup capacity may be needed when feedstock or gas production varies.
What belongs in the steam-system boundary?
The scope may include gas treatment, 연소, boiler, water treatment, deaeration, blowdown, steam header, metering, condensate return and backup interfaces.
How should steam acceptance be measured?
Use metered flow, pressure and temperature during a defined stable operating window with the agreed biomass, carbonization conditions and auxiliary loads.
장비를 선택하기 전에 재료를 정의하십시오..
대표적인 자료 설명 공유, 사용 가능한 볼륨, 사이트 상태 및 대상 출력. YUSHUNXIN은 이러한 사실을 사용하여 관련 프로세스 경계 및 구성 논의를 준비합니다..
Carbonization with waste-heat steam supply
Configure the carbonization line and receiving steam load from one measured heat and mass balance.
들어오는 재료
Prepared biomass plus hourly/daily feed profile and target carbon specification.
예상 출력
Biochar and a qualified waste-heat stream for an agreed steam duty.
프로젝트 인터페이스
Feed drying, carbonization gas, 연소, waste-heat boiler, water treatment, steam pressure/load and operating control.
선택한 프로세스 경계와 일치하는 행만 사용.
| 카탈로그 참조 | 용량 | 힘 | 물리적 봉투 | 포함된 경계 |
|---|---|---|---|---|
| SXTD820Continuous carbonization | 1–2 m³/h | 95 kW | 600 m² catalogue land reference | Prepared biomass continuous carbonization line |
| SXTD1200Continuous carbonization | 3–5 m³/h | 110 kW | 650 m² catalogue land reference | Prepared biomass continuous carbonization line |
| SXTD1500Continuous carbonization | 5–8 m³/h | 153 kW | 800 m² catalogue land reference | Prepared biomass continuous carbonization line |
| SXTD1800Continuous carbonization | 8–10 m³/h | 178 kW | 800 m² catalogue land reference | Prepared biomass continuous carbonization line |
| SXTD2000 - 10–14 classContinuous carbonization | 10–14 m³/h | 190 kW | 850 m² catalogue land reference | Catalogue prints SXTD2000 for this class |
| SXTD2000 - 14–17 classContinuous carbonization | 14–17 m³/h | 220 kW | 850 m² catalogue land reference | Catalogue repeats SXTD2000; final model code requires written confirmation |
구성 규칙: 카탈로그 용량은 계획 참조입니다.. 안정적인 처리량, 설치/작동 전원, 발자국, 회복, 청정, 배출 및 유틸리티 수요에는 승인된 장비 목록이 필요합니다., 대표 자료 및 서면 승인 조건.
구성 및 견적 전에 필요한 정보
- 대표자료사진, 사양 및 사용 가능한 샘플.
- 필요 용량 + 교대당 시간, 하루 교대근무수 및 근무일수.
- 목표 출력, 샘플링 방법 및 다운스트림 수신기 요구 사항.
- 사이트 국가, 사용 가능한 전력, 연료, 물, 압축 공기 및 건물 한계.
- 지역 환경, 불, 보관 및 산업 안전 요구 사항.
- 요청된 배송 범위: 장비, 공들여 나열한 것, 설치, 시운전 및 교육.
